Butterfly valve with hand lever Series BUW9-SSIS-L-A

Body Brass; Knurled screw; Drain port Hose nozzle 12mm; Medium temperature -10...+90°C; Pressure range 0...25bar

Wafer type; Rising stem; Body 1.4408; Gate 1.4401; Metal sealing; Sliding guide Bronze; Gate And Seat Reinforced; Packing Graphite; Nominal flange pressure PN10; Unidirectional sealed; Medium temperature Max. +250°C

Knife gate valve with handwheel Series K1V

Other materiales - A04

; PN40; Body 1.4408; Seat, Cone, Stem Stainless steel 1.4401; Handwheel Steel; Packing gland Graphite; Back seal; Metal sealing; Rising stem; Medium temperature -10...+400°C; Pressure range 0...40bar

Globe valve Series 8906VA

; PN16; Body Cast iron EN-GJL-250; Seat, Cone, Stem Stainless steel 1.4021; Handwheel Steel; Packing gland Graphite; Back seal; Metal sealing; Rising stem; Body Painted RAL5005 (Blue) Thickness 50µm; Medium temperature -10...+300°C; Pressure range 0...16bar

Globe valve Series 8906GG

PN40; Body Steel; Seat, Cone, Stem Stainless steel 1.4021; Handwheel Steel; Packing gland Graphite; Back seal; Metal sealing; Rising stem; Body Painted RAL906 (White aluminum) Thickness 50µm; Medium temperature -10...+400°C; Pressure range 0...40bar

Globe valve Series 8906ST

Suitable for Series BUW6, BUW2, BUW4, BULG And BULC

Gear box

; ANSI150; Body Cast steel; Seat, Cone, Stem Stainless steel 1.4006; Handwheel Steel; Packing gland Graphite; Back seal; Metal sealing; Rising stem; Medium temperature -29...+425°C

Globe valve Series GL102

; ANSI300; BodyCast steel; Seat, Cone, Stem Stainless steel 1.4006; Handwheel Steel; Packing gland Graphite; Back seal; Metal sealing; Rising stem; Medium temperature -29...+425°C

Globe valve Series GL117

Flanged type; Material Ductile iron EN-GJS-500-7; Wedge EPDM rubberized; Nominal flange pressure PN10; Medium temperature -20...+70°C; Pressure range 0...10bar

Gate valve with hand wheel Series GA011

Flanged type; Material Ductile iron EN-GJS-500-7; Gate Ductile iron EN-GJS-500-7; Seal Bronze; Packing EPDM; Nominal flange pressure PN10; Medium temperature -10...+70°C; Pressure range 0...10bar

Knife gate valve with gear box Series GA019

; PN16; Body EN-GJS-400-18-LT; Seat, Cone, Stem Stainless steel 1.4021; Handwheel Steel; Packing gland Graphite; Back seal; Metal sealing; Rising stem; Medium temperature -10...+350°C; Pressure range 0...16bar

Globe valve Series GL118

; PN10; Body Cast iron EN-GJL-250; Seat, Stem Stainless steel; Handwheel Steel; Packing FKM; Non rising stem; Medium temperature -10…+200°C; Pressure range 0...10bar

Gate valve Series GA010

; ANSI150; Body 1.4307; Seat, Cone, Stem Stainless steel 1.4401; Handwheel Malleable cast iron; Rising stem

Knife gate valve Series GA021

Flanged type; Rising stem; Metal sealing-TRIM8; Packing Graphite; Nominal flange pressure ANSI300; Medium temperature -29…+425 °C

Gate valve with handwheel Series GA022

Manual operated; Body 1.4408; Cone, Stem, Head end Stainless steel 1.4571; Handwheel Steel Plastic coated; Seat seal PTFE; Packing PTFE filled with coal; Back seal; PTFE; Rising stem; Medium temperature -30…+200°C; Pressure range 0...40bar

Angle seat-Globe valve Series SE27

; PN40; Body; Seat 1.4408; Cone, Stem 1.4571; Handwheel Cast iron; Packing gland Graphite; Metal sealing; Rising stem; Medium temperature -60…+300°C; Pressure range 0...40bar

Globe valve Series GL100

ANSI150; Material 1.4408; Handwheel Cast iron; Packing gland Graphite; Metal sealing; Rising stem

Gate valve Series GA005

PN10; Body Polypropylen; Diaphragm EPDM/PTFE; With handwheel; Medium temperature Max. +80°C; Pressure range 0...10bar

Diaphragm valve Series DP02

ANSI150;Length According to ANSI B16.10; Reduced bore; Body A350LF2; Seat, Cone, Stem Stainless steel AISI 304; Handwheel Malleable cast iron; Rising stem

Knife gate valve Series GA026

Wafer type; Rising stem; Body Cast iron EN-GJL-250; Gate 1.4301; Soft sealed EPDM; Packing PTFE-Synthetic/EPDM; Screws Stainless steel; Nominal flange pressure PN10; Sealed in both directions; Medium temperature -5...+90°C

Knife gate valve with handwheel Series AB1V

Body Stainless steel 1.4408; Seal PTFE; Handwheel Aluminum; Stem seal PTFE; Medium temperature -20...+150°C; Pressure range 0...16bar

Angle seat-Globe valve Series GA112

Body Stainless steel 1.4571; Stem seal PTFE; Medium temperature -20...+60°C; Free of oil and grease for oxygen

Needle valve Series 110VA-S

Body Bronze; Stem seal EPDM; Medium temperature 0...+125°C; Pressure range 0...16bar

Knife gate valve Series GA027

BodyCast steel; Cone, Stem 13% Cr; Seat 1.4301/Graphite; Packing gland Graphite; Socket weld ends; ANSI 800lbs

Globe valve Series GL121

Bellow; PN16; Body Cast iron EN-GJL-250; Seat, Cone, Stem Stainless steel 1.4021; Handwheel Steel; Packing gland Graphite; Back seal; Metal sealing; Non rising stem; Medium temperature -10...+300°C

Globe valve Series GL122

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+100°C; Pressure range 0...16bar

Butterfly valve with manual gear box Series BUW6-DSN-G

; PN40; Body Steel; Cone, Stem Stainless steel 1.4021; Handwheel Steel; Packing gland Graphite; Back seal; Seat seal PEEK; Rising stem; Pressure range 0…40bar

Globe valve Series GL124

; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner EPDM; Medium temperature -10...+130°C

Butterfly valve with manual gear box Series BUL1-G, BULA-G

; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner EPDM; Nominal flange pressure PN6; Medium temperature -10...+130°C; Pressure range 0...6bar

Butterfly valve with hand lever Series BUL1-L

PN16; Body Cast iron EN-GJL-250; Seat, Cone, Stem Stainless steel 1.4021; Handwheel Steel; Packing gland Graphite; Back seal; Metal sealing; Rising stem; Body Painted RAL5013 (Cobalt blue) Thickness 40µm; Medium temperature -10...+300°C; Pressure range 0...16bar; ATEX-design

Globe valve Series GL119-W-A

; PN40; Body 1.4408; Seat, Cone, Stem Stainless steel 1.4401; Handwheel Steel; Packing gland Graphite; Back seal; Metal sealing; Non rising stem; Medium temperature -10..+400°C; ATEX-design

Globe valve Series GL123-A

; PN40; Control cone; Body 1.4408; Seat, Cone, Stem Stainless steel 1.4401; Handwheel Steel; Packing gland Graphite; Back seal; Metal sealing; Non rising stem; Medium temperature -10..+400°C; ATEX-design

Globe valve Series GL123-AC

Body 1.0619; Nominal flange pressure PN25; Handwheel Ductile iron; Packing gland Graphite; Rising stem; Medium temperature -10...+400°C; Pressure range 0...25bar

Gate valve with handwheel Series GA004

PN25; Body Steel; Seat, Cone, Stem Stainless steel 1.4021; Handwheel Steel; Packing gland Graphite; Back seal; Metal sealing; Rising stem; Body Painted RAL906 (White aluminum) Thickness 50µm; Medium temperature -10...+400°C; Pressure range 0...25bar

Globe valve Series GL008

; PN25; Body Ductile iron EN-GJS-400-15; Seat, Cone, Stem Stainless steel 1.4021; Handwheel Steel; Bellow 1.4541; Rising stem; Medium temperature -10...+350°C; Pressure range 0...25bar; Incl. Limiting of stroke

Globe valve Series GL125

Wafer type; Length According to EN558−1R20; Body Cast iron EN-GJL-250 Epoxy coated; Disc 1.4408; Shaft 1.4005; Liner EPDM; Nominal flange pressure PN16/ANSI150; Medium temperature -10...+120°C; Pressure range 0...16bar

Butterfly valve with hand lever Series 600105

PN16; Body Cast iron EN-GJL-250; Seat, Cone, Stem Stainless steel 1.4021; Handwheel Steel; Packing gland Graphite; Back seal; Metal sealing; Rising stem; Body Painted RAL5013 (Cobalt blue) Thickness 40µm; Medium temperature -10...+300°C; Pressure range 0...16bar; With control cone

Globe valve Series GL119-C

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+100°C; Pressure range 0...16bar

Butterfly valve with bare shaft Series BUW6-DN-B

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+100°C; Pressure range 0...16bar

Butterfly valve with hand lever Series BUW6-DN-L

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc Ductile iron EN-GJS-400-15 Zinc plated, Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+100°C; Pressure range 0...16bar

Butterfly valve with manual gear box Series BUW6-DPN-G

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Shaft 1.4016; Liner EPDM; Medium temperature -10...+130°C

Butterfly valve with bare shaft Series BUW6-DE-B, BUW1-DE-B, BUWC-DE-B, BUWZ-DE-B

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner EPDM; Medium temperature -10...+130°C

Butterfly valve with bare shaft Series BUW1-DSE-B, BUW2-DSE-B, BUW6-DSE-B, BUWC-DSE-B, BUWV-DSE-B, BUWZ-DSE-B

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner NBR; Medium temperature -10...+100°C

Butterfly valve with bare shaft Series BUW1-DSN-B, BUW6-DSN-B, BUW-2-DSN, BUWV-DSN-B

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+100°C; Pressure range 0...16bar

Butterfly valve with hand lever Series BUW6-DSN-L

Wafer type; Length According to EN558−1R20; For abrasive medias (e.g. sand, cement, etc.); Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner Carboxylated NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+100°C; Pressure range 0...6bar

Butterfly valve with bare shaft Series BUW2-DSC-B

Wafer type; Length According to EN558−1R20; Body, Disc And Shaft 1.4408; Liner EPDM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -35...+130°C; Pressure range 0...16bar

Butterfly valve with bare shaft Series BUW6-SSES-B

Wafer type; Length According to EN558−1R20; Body, Disc And Shaft 1.4408; Liner EPDM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -35...+130°C; Pressure range 0...16bar

Butterfly valve with hand lever Series BUW6-SSES-L

Wafer type; Length According to EN558−1R20; Body, Disc And Shaft 1.4408; Liner EPDM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -35...+130°C; Pressure range 0...16bar

Butterfly valve with manual gear box Series BUW6-SSES-G

Wafer type; Rising stem; Body Cast iron EN-GJL-250/Ductile iron EN-GJS-500-7; Gate 1.4301; Soft sealed EPDM; Packing PTFE-Synthetic/EPDM; Nominal flange pressure PN10; Unidirectional sealed; Medium temperature -5...+90°C

Knife gate valve with handwheel Series A1V

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner EPDM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+130°C; Pressure range 0...16bar; Silicone-free

Butterfly valve with bare shaft Series BUW6-DSE-B-S

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner EPDM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+130°C; Pressure range 0...16bar; Silicone-free

Butterfly valve with hand lever Series BUW6-DSE-L-S

Wafer type; Body Cast iron EN-GJL-250/Ductile iron EN-GJS-500-7; Gate 1.4301; Soft sealed EPDM; Packing PTFE-Synthetic/EPDM; Screws Stainless steel; Nominal flange pressure PN10; Unidirectional sealed; Control pressure 5,5...8bar; Medium temperature -5...+90°C; Prepared for 2 inductive limit switches M18

Knife gate valves with single acting pneumatic actuator NO Series A1S0

Suitable for Butterfly valves Series BUW4/BULD-PTFE

Liner

Wafer type; Length According to EN558−1R20; Body, Disc And Shaft 1.4408; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -25...+100°C; Pressure range 0...16bar

Butterfly valve with bare shaft Series BUW6-SSNS-B

Wafer type; Length According to EN558−1R20; Body Aluminum, Disc 1.4408; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -25...+100°C; Pressure range 0...10bar

Butterfly valve with bare shaft Series BUW6-ASN-B

Wafer type; Double eccentric; Length According to EN558−1R20; Body, Disc 1.4408; Shaft 1.4542; Seat RTFE; Medium temperature -10...+230°C; Pressure range 0...25bar

Butterfly valve with bare shaft Series BUW-SSRS-B

; PN40; With bellows; Body 1.4408; Seat, Cone, Stem Stainless steel 1.4401; Handwheel Steel; Packing gland Graphite; Back seal; Metal sealing; Rising stem; Medium temperature -10..+400°C

Globe valve Series GL116-W

ATEX II 2 G/D Ex h X; Wafer type;Double eccentric; Length According to EN558−1R20; Body, Disc 1.4408, Shaft 1.4542; Seat RTFE; Nominal flange pressure PN10/16/25/ANSI150; Medium temperature -10...+230°C; Pressure range 0...25bar

Butterfly valve with bare shaft Series BUW9-SSRS-B-A

Wafer type; Double eccentric; Length According to EN558−1R20; Body, Disc 1.4408; Shaft 1.4542; Seat RTFE; Medium temperature -10...+230°C; Pressure range 0...25bar

Butterfly valve with manual gear box Series BUW-SSR-G

; Lug type; Length According to EN558−1R20; Body; Disc And Shaft 1.4408Liner Silicone; Medium temperature -60...+190°C

Butterfly valve with bare shaft Series BULG-B, BULC-B

; Lug type; Length According to EN558−1R20; Body; Disc And Shaft 1.4408Liner Silicone; Medium temperature -60...+190°C

Butterfly valve with hand lever Adjustable Series BULG-R, BULC-R

ATEX II 2 G/D Ex h X; Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+100°C; Pressure range 0...16bar

Butterfly valve with hand lever Series BUW6-DN-L-A

Wafer type; Rising stem; Body Cast iron EN-GJL-250/Ductile iron EN-GJS-500-7; Gate 1.4301; Metal sealing; Packing PTFE-Synthetic; Screws Stainless steel; Nominal flange pressure PN10; Unidirectional sealed; Medium temperature -10...+270 °C; Prepared for 2 inductive limit switches M18

Knife gate valve with handwheel Series A1V

; PN100; Body Steel; Seat, Cone, Stem Stainless steel Handwheel Cast iron; Packing gland Graphite; Rising stem; Medium temperature -10...+400°C; Pressure range 0...100Bar

Globe valve Series GL114

; PN63; Body Steel; Seat, Cone, Stem Stainless steel Handwheel Cast iron; Packing gland Graphite; Rising stem; Medium temperature -10...+400°C; Pressure range 0...63Bar

Globe valve Series GL129

ATEX II 2 G/D Ex h X; Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+100°C; Pressure range 0...16bar

Butterfly valve with hand lever Series BUW6-DSN-L-A

ATEX II 2 G/D Ex h X; Wafer type; DVGW-gas-approved; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+60°C; Pressure range 0...16bar

Butterfly valve with hand lever Series BUW6-DSD-L-A

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner Carboxylated NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+100°C; Pressure range 0...16bar

Butterfly valve with bare shaft Series BUW6-DSC-B

Wafer type; Length According to EN558−1R20; Body Steel; Disc 1.4408; Shaft 1.4016; Liner FKM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -20...+200°C; Pressure range 0...16bar

Butterfly valve with bare shaft Series BUW6*-CSV-B

Wafer type; Length According to EN558−1R20; Body Steel; Disc 1.4408; Shaft 1.4016; Liner FKM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -20...+200°C; Pressure range 0...16bar

Butterfly valve with hand lever Series BUW6-CSV-L

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+100°C; Pressure range 0...6bar

Butterfly valve with bare shaft Series BUW2-DSN-B-A

Wafer type; Double eccentric; Length According to EN558−1R20; Body And Disc 1.4408, Shaft 1.4542; Seat RTFE; Nominal flange pressure PN10/16/25/ANSI150; Medium temperature -10...+230°C; Pressure range 0...25bar

Butterfly valve with hand lever Series BUW9-SSRS-L

ATEX II 2 G/D Ex h X; Wafer type;Double eccentric; Length According to EN558−1R20; Body And Disc 1.4408; Shaft 1.4542; Seat RTFE; Nominal flange pressure PN10/16/25/ANSI150; Medium temperature -10...+230°C; Pressure range 0...25bar

Butterfly valve with hand lever Series BUW9-SSRS-L-A

Lug type; Rising stem; Body Cast steel; Gate 1.4301; Soft sealed EPDM; Packing PTFE-Synthetic/EPDM; Nominal flange pressure PN10; Unidirectional sealed; Medium temperature -5...+90°C

Knife gate valve with gearbox Series T1G

Wafer type; Double eccentric; Length According to EN558−1R20; Body And Disc 1.4408, Shaft 1.4542; Seat Inconel 625; Medium temperature -10...+425°C; Pressure range 0...25bar

Butterfly valve with bare shaft Series BUW9-SSIS-B

Lug type; Rising stem; Body Stainless steel AISI 316; Gate Stainless steel AISI 316; Soft sealed FKM; Packing PTFE-Synthetic/FKM; Nominal flange pressure PN10; Unidirectional sealed; Medium temperature 0...+120 °C

Knife gate valve with handwheel Series T1V

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc Aluminium-bronze; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+100°C; Pressure range 0...16bar

Butterfly valve with bare shaft Series BUW6-DNN-B

Wafer type; Rising stem; Body Body Cast iron EN-GJL-250/Ductile iron EN-GJS-500-7; Gate 1.4301; Soft sealed NBR; Packing PTFE-Synthetic; Screws Stainless steel; Nominal flange pressure PN10; Unidirectional sealed; Medium temperature -10...+90°C

Knife gate valve with handwheel Series A1V

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408 HALAR-coated; Shaft 1.4016; Liner EPDM; Medium temperature -10...+130°C

Butterfly valve with bare shaft Series BUW6-DLE-B

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4542 PTFE-coated; Shaft 1.4408; Liner PTFE/silicone; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+190°C; Pressure range 0...10bar

Butterfly valve with bare shaft Series BUW4-DZTS-B

; PN40; Body Steel; Seat, Cone, Stem Stainless steel 1.4021; Handwheel Steel; Packing gland Graphite; Back seal; Metal sealing; Rising stem; Medium temperature -10…+400°C; Incl. Inspection certificate EN-10204-3.1 For material, pressure, function and tightness

Globe valve Series GL120

ATEX II 2 G/D Ex h X; Wafer type; Length According to EN558−1R20; Body Steel Epoxy coated, Disc 1.4408; Shaft 1.4016; Liner NBR-DVGW; Nominal flange pressure PN10/16/ANSI150; Medium temperature -25...+100°C; Pressure range 0...16bar; ATEX II 2 G/D c TX

Butterfly valve with bare shaft Series BUW6-CSD-B-A

ATEX II 2 G/D Ex h X; Wafer type; Length According to EN558−1R20; Body Steel Epoxy coated, Disc 1.4408; Shaft 1.4016; Liner NBR-DVGW; Nominal flange pressure PN10/16/ANSI150; Medium temperature -25...+100°C; Pressure range 0...16bar; ATEX II 2 G/D c TX

Butterfly valve with hand lever Series BUW6-CSD-L-A

Wafer type; Length According to EN558−1R20; Body Steel; Disc And Shaft 1.4408; Liner EPDM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+130°C; Pressure range 0...16bar

Butterfly valve with bare shaft Series BUW6-CSES-B

; PN40; Body Steel; Seat, Cone, Stem Stainless steel 1.4021; Handwheel Steel; Packing gland Graphite; Back seal; Metal sealing; Rising stem; Medium temperature -10…+400°C; Pressure range; With control cone

Globe valve Series GL120

ATEX II 2 G/D Ex h X; Wafer type; Length According to EN558−1R20; Body Steel Epoxy coated, Disc 1.4408; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -25...+100°C; Pressure range 0...16bar; ATEX II 2 G/D c TX

Butterfly valve with bare shaft Series BUW6-CSN-B-A

ATEX II 2 G/D Ex h X; Wafer type; Length According to EN558−1R20; Body Steel Epoxy coated, Disc 1.4408; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -25...+100°C; Pressure range 0...16bar; ATEX II 2 G/D c TX

Butterfly valve with hand lever Series BUW6-CSN-L-A

; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner FKM; Medium temperature -10...+200°C

Butterfly valve with bare shaft Series BUL-DSV-B

Body Ductile iron; Wedge EPDM rubberized; Packing NBR; Medium temperature 0...+50°C

Gate valve with hand wheel Series GA004

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408 Chenisil Coated ; Shaft 1.4016; Liner Polyurethane; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+90°C; Pressure range 0...16bar

Butterfly valve with bare shaft Series BUW6-DS1P1-B

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408 Chenisil Coated ; Shaft 1.4016; Liner Polyurethane; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+90°C; Pressure range 0...16bar

Butterfly valve with hand lever Series BUW6-DS1P1-L

Body 1.4401; Socket weld ends; 800lbs; Handwheel Steel; Packing gland PTFE; Rising stem

Gate valve with handwheel For cryogenic applications -196°C Series GA029

Body Stainless steel 1.4571; Stem seal PTFE; Medium temperature -20...+250°C

Needle valve Series 110VA-NPT

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Shaft 1.4016; Liner FKM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+200°C; Pressure range 0...16bar

Butterfly valve with hand lever Series BUW6-DV-L

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Shaft 1.4016; Liner FKM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+200°C; Pressure range 0...16bar

Butterfly valve with bare shaft Series BUW6-DV-B

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner EPDM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+130°C; Pressure range 0...16bar; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BUW6-DSE-B-3C

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner EPDM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+130°C; Pressure range 0...16bar; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with hand lever Series BUW6-DSE-L-3C

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner FKM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+200°C; Pressure range 0...16bar

Butterfly valve with bare shaft Series BUW6-DSV-B

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner FKM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+200°C; Pressure range 0...16bar

Butterfly valve with hand lever Series BUW6-DSV-L

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner FKM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+200°C; Pressure range 0...16bar; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BUW6-DSV-B-3C

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner FKM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+200°C; Pressure range 0...16bar; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with hand lever Series BUW6-DSV-L-3C

; PN40; Body Steel; Seat Stainless steel 1.4370; Cone, Stem Stainless steel 1.4021; Handwheel Steel; Packing gland Graphite; Back seal; Metal sealing; Rising stem; Medium temperature -10…+400°C; Pressure range 0…40bar; Butt weld ends; With control cone

Globe valve Series GL133

; PN40; Body Steel; Seat Stainless steel 1.4370; Cone, Stem Stainless steel 1.4021; Handwheel Steel; Packing gland Graphite; Back seal; Metal sealing; Rising stem; Medium temperature -10…+400°C; Pressure range 0…40bar; Incl. Inspection certificate EN-10204-3.1 For material, pressure, function and tightness; Butt weld ends; With control cone

Globe valve Series GL133

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc And Shaft 1.4408; Liner FKM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+200°C; Pressure range 0...16bar

Butterfly valve with bare shaft Series BUW6-DSVS-B

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc And Shaft 1.4408; Liner FKM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+200°C; Pressure range 0...16bar

Butterfly valve with manual gear box Series BUW6-DSVS-G

ATEX II 2 G/D Ex h X; Wafer type; Length According to EN558−1R20; For abrasive medias (e.g. sand, cement, etc.); Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner Carboxylated NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+100°C; Pressure range 0...6bar

Butterfly valve with bare shaft Series BUW2-DSC-B-A

Lug type; Length According to EN558−1R20; For abrasive medias (e.g. sand, cement, etc.); Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner Carboxylated NBR; Medium temperature -10...+100°C; Pressure range 0...6bar

Butterfly valve with bare shaft Series BULI-B

Lug type; Length According to EN558−1R20; For abrasive medias (e.g. sand, cement, etc.); Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner Carboxylated NBR; Medium temperature -10...+100°C; Pressure range 0...6bar

Butterfly valve with hand lever Series BULI-L

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner Polyurethane; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+90°C; Pressure range 0...16bar

Butterfly valve with bare shaft Series BUW6-DSP1-B

Wafer type; Rising stem; Body Cast iron EN-GJL-250; Gate 1.4301; Soft sealed EPDM; Packing PTFE-Synthetic/EPDM; Screws Stainless steel; Nominal flange pressure PN10; Sealed in both directions; Medium temperature -5...+90°C; Prepared for 2 inductive limit switches M18

Knife gate valve with handwheel Series AB1V

Wafer type; Double eccentric; Length According to EN558−1R20; Body Steel Epoxy coated; Disc 1.4408, Shaft 1.4542; Seat RTFE; Nominal flange pressure PN10/16/25/ANSI150; Medium temperature -10...+230°C; Pressure range 0...25bar

Butterfly valve with hand lever Series BUW9-CSRS-L

ATEX II 2 G/D Ex h X; Lug type; Double eccentric; Length According to EN558−1R20; Body, Disc 1.4408, Shaft 1.4542; Seat RTFE/Inconel 625-Graphite; Nominal flange pressure PN16 Medium temperature -10...+230°C; Pressure range 0...16bar; Fire-safe; ATEX II 2 G/D c TX

Butterfly valve with bare shaft Series BULA-SSRIS-B-A

ATEX II 2 G/D Ex h X; Lug type;Double eccentric; Length According to EN558−1R20; Body, Disc 1.4408, Shaft 1.4542; Seat RTFE/Inconel 625-Graphite; Nominal flange pressure PN25 Medium temperature -10...+230°C; Pressure range 0...25bar; Fire-safe; ATEX II 2 G/D c TX

Butterfly valve with bare shaft Series BULV*-SSRIS-B-A

; ATEX II 2 G/D Ex h X; Lug type;Double eccentric; Length According to EN558−1R20; Body, Disc 1.4408; Shaft 1.4542; Seat RTFE/Inconel 625-Graphite; Nominal flange pressure PN16 Medium temperature -10...+230°C; Pressure range 0...16bar; Fire-safe; ATEX II 2 G/D c TX

Butterfly valve with manual gear box Series BULA-SSR2S-G-A

ATEX II 2 G/D Ex h X; Lug type; Double eccentric; Length According to EN558−1R20; Body, Disc 1.4408; Shaft 1.4542; Seat RTFE/Inconel 625-Graphite; Nominal flange pressure PN25; Medium temperature -10...+230°C; Pressure range 0...25bar; Fire-safe; ATEX II 2 G/D c TX

Butterfly valve with manual gear box Series BULA*-SSRIS-G-A

ATEX II 2 G/D Ex h X; Lug type; Double eccentric; Length According to EN558−1R20; Body, Disc 1.4408; Shaft 1.4542; Seat RTFE/Inconel 625-Graphite; Nominal flange pressure PN16 Medium temperature -10...+230°C; Pressure range 0...16bar; Fire-safe; ATEX II 2 G/D c TX

Butterfly valve with bare shaft Series BULA-SSR2S-B-A

ATEX II 2 G/D Ex h X; Lug type;Double eccentric; Length According to EN558−1R20; Body, Disc 1.4408; Shaft 1.4542; Seat RTFE/Inconel 625-Graphite; Nominal flange pressure PN25; Medium temperature -10...+230°C; Pressure range 0...25bar; Fire-safe; ATEX II 2 G/D c TX

Butterfly valve with bare shaft Series BULV*-SSR2S-B-A

ATEX II 2 G/D Ex h X; Lug type; Double eccentric; Length According to EN558−1R20; Body And Disc 1.4408, Shaft 1.4542; Seat RTFE/Inconel 625-Graphite; Nominal flange pressure PN25; Medium temperature -10...+230°C; Pressure range 0...25bar; Fire-safe; ATEX II 2 G/D c TX

Butterfly valve with manual gear box Series BULA*-SSR2S-G-A

Wafer type; Rising stem; Body 1.4408; Gate 1.4401; Metal sealing; Packing PTFE; Nominal flange pressure PN10; Unidirectional sealed; Medium temperature -30...+200°C

Knife gate valve with handwheel Series A1V

ATEX II 2 G/D Ex h X; Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner FKM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+200°C; Pressure range 0...16bar

Butterfly valve with bare shaft Series BUW6-DSV-B-A

ATEX II 2 G/D Ex h X; Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner FKM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+200°C; Pressure range 0...16bar

Butterfly valve with hand lever Series BUW6-DSV-L-A

; PN100; Body Steel; Seat, Cone, Stem Stainless steel; Handwheel Cast iron; Packing gland Graphite; Rising stem; Medium temperature -10…+450°C; Pressure range 0…100bar

Globe valve Series GL131

Wafer type; DVGW-gas-approved;Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+60°C

Butterfly valve with bare shaft Series BUW6-DSD-B, BUW4-DSD-B

Wafer type; Rising stem; Body Cast iron EN-GJL-250/Ductile iron EN-GJS-500-7; Gate 1.4301; Soft sealed NBR; Packing PTFE-Synthetic/EPDM; Screws Stainless steel; Nominal flange pressure PN10; Unidirectional sealed; Medium temperature -10...+90°C

Knife gate valve with handwheel Series A1V

Lug type; DVGW-gas-approved;Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner NBR; Medium temperature -10...+60°C

Butterfly valve with bare shaft Series BULG-B-DVGW, BULC-B-DVGW

Lug type; DVGW-gas-approved; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner NBR; Medium temperature -10...+60°C

Butterfly valve with hand lever Series BULG-L-DVGW, BULC-L-DVGW

Lug type; DVGW-gas-approved;Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Shaft 1.4016; Liner NBR; Medium temperature -10...+60°C

Butterfly valve with bare shaft Series BULG-B-DVGW, BULC-B-DVGW

ATEX II 2 G/D Ex h X; Wafer type; DVGW-gas-approved; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+60°C

Butterfly valve with bare shaft Series BUW6-DSD-B-A, BUW4-DSD-B-A

Wafer type; With DVGW certificate For water; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4021; Liner EPDM; Medium temperature 0...+40°C

Butterfly valve with bare shaft Series BUA-B-DVGW

Suitable for Knife gate valve Series A

Packing PTFE-Synthetic/FKM

Wafer type; Rising stem; Body Cast iron EN-GJL-250/Ductile iron EN-GJS-500-7; Gate 1.4401; Soft sealed EPDM; Packing PTFE-Synthetic/EPDM; Screws Stainless steel; Nominal flange pressure PN10; Unidirectional sealed; Medium temperature -5...+90°C

Knife gate valve with handwheel Series A1V2HS2-5-B

Wafer type; Length According to EN558−1R20; Body, Disc And Shaft 1.4408; Liner EPDM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -35...+130°C; Pressure range 0...16bar; Pressure range 0...16bar; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BUW6-SSES-B-3C

Wafer type; Length According to EN558−1R20; Body, Disc And Shaft 1.4408; Liner EPDM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -35...+130°C; Pressure range 0...16bar; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with manual gear box Series BUW6-SSES-G-3C

Wafer type; Length According to EN558−1R20; Body Steel Epoxy coated, Disc 1.4408; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+100°C; Pressure range 0...16bar; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BUW6-CSN-B-3C

Lug type; Length According to EN558−1R20; Body made of carbon steel A216-WCB; Disc 1.4408; Shaft 1.4016; Liner EPDM; Medium temperature -10...+130°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BULG-B-3C, BULC-B-3C

Body Brass; Stem seal PTFE; Medium temperature -20...+60°C; Free of oil and grease for oxygen

Needle valve Series 110MS

Lug type; Double eccentric; Length According to EN558−1R20; Body, Disc 1.4408; Shaft 1.4542; Seat Inconel 625; Medium temperature -10...+425°C

Butterfly valve with bare shaft Series BUL-SSIS-B

Wafer type; DVGW-gas-approved; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner NBR ; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+60°C

Butterfly valve with manual gear box Series BUW4-DSD-G-DVGW

Wafer type; Length According to EN558−1R20; Body, Disc, Shaft 1.4408; Liner EPDM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -15...+130°C; Pressure range 0...16bar

Butterfly valve with hand lever Series BUS6-SSES-L

;Wafer type; Length According to EN558−1R20; Body, Disc 1.4408; Shaft 1.4028; Liner EPDM; Nominal flange pressure PN10/16; Medium temperature -15...+130°C; Pressure range 0...16bar

Butterfly valve with hand lever Series BUSG-SSE-L

; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15; Disc 1.4408; Shaft 1.4016; Liner FKM; Medium temperature -10...+200°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BUL-DSV-B-3C

Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner FKM; Medium temperature -10...+200°C

Butterfly valve with hand lever Series BULG-L, BULC-L, BULY-L

ATEX II 2 G/D Ex h X; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner FKM; Medium temperature -10...+200°C

Butterfly valve with hand lever Series BULG-L-A, BULC-L-A, BULY-L-A

ATEX II 2 G/D Ex h X; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner FKM; Medium temperature -10...+200°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with hand lever Series BULG-L-A-3C, BULC-L-A-3C, BULY-L-A-3C

Wafer type; Length According to EN558−1R20; Body Steel Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner NBR; Nominal flange pressure PN25; Medium temperature -10...+100°C; Pressure range 0...25bar

Butterfly valve with bare shaft Series BUW8-CSN-B

Wafer type; Length According to EN558−1R20; Body Steel Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner NBR; Nominal flange pressure PN25; Medium temperature -10...+100°C; Pressure range 0...25bar

Butterfly valve with hand lever Series BUW8-CSN-L

Wafer type; Length According to EN558−1R20; Body Steel Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner NBR; Nominal flange pressure PN25; Medium temperature -10...+100°C; Pressure range 0...25bar; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with hand lever Series BUW8-CSN-L-3C

Wafer type; Length According to EN558−1R20; Body Steel Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner NBR; Nominal flange pressure PN25; Medium temperature -10...+100°C; Pressure range 0...25bar; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BUW8-CSN-B-3C

Wafer type; Length According to EN558−1R20; Body Aluminum Epoxy coated; Shaft 1.4016; Liner Silicone; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+190°C; Pressure range 0...6bar

Butterfly valve with bare shaft Series BUW2-AS-B

Wafer type; Length According to EN558−1R20; Body Aluminum Epoxy coated; Shaft 1.4016; Liner Silicone; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+190°C; Pressure range 0...6bar

Butterfly valve with hand lever Series BUW2-AS-L

Wafer type; Double eccentric; Length According to EN558−1R20; Body Steel Epoxy coated; Disc 1.4408; Shaft 1.4542; Seat Inconel 625; Medium temperature -10...+425°C; Pressure range 0...25bar

Butterfly valve with bare shaft Series BUW9-CSIQ-B

Wafer type; Double eccentric; Length According to EN558−1R20; Body Steel Epoxy coated; Disc 1.4408; Shaft 1.4542; Seat RTFE; Medium temperature -10...+230°C; Pressure range 0...25bar

Butterfly valve with bare shaft Series BUW-CSRS-B

Wafer type; Double eccentric; Length According to EN558−1R20; Body, Disc 1.4408; Shaft 1.4542; Seat RTFE/Inconel 625-Graphite; Medium temperature -10...+230°C; Pressure range 0…25bar; Fire-safe

Butterfly valve with bare shaft Series BUW9-SSR2S-B

ATEX II 2 G/D Ex h X; Wafer type; Double eccentric; Length According to EN558−1R20; Body Steel Epoxy coated; Disc 1.4408; Shaft 1.4542; Seat RTFE; Medium temperature -10...+230°C; Pressure range 0...25bar

Butterfly valve with bare shaft Series BUW-CSR-B-A

; Lug type; Double eccentric; Length According to EN558−1R20; Body Steel Epoxy coated; Disc 1.4408; Shaft 1.4542; Seat Inconel 625; Medium temperature -10...+425°C

Butterfly valve with bare shaft Series BUL*-CSIS-B

ATEX II 2 G/D Ex h X; Wafer type; Double eccentric; Length According to EN558−1R20; Body Steel Epoxy coated; Disc 1.4408; Shaft 1.4542; Seat RTFE/Inconel 625-Graphite; Medium temperature -10...+230°C; Pressure range 0…25bar; Fire-safe; ATEX II 2 G/D x TX

Butterfly valve with bare shaft Series BUW9-CSR2Q-B-A

Body Stainless steel 1.4571; Medium temperature -20...+250°C; Connection Male thread

Globe valve Series GL145

Wafer type; Double eccentric; Length According to EN558−1R20; Body, Disc 1.4408; Shaft 1.4542; Seat RTFE/Inconel 625-Graphite; Medium temperature -10...+230°C; Pressure range 0...25bar; Fire-safe

Butterfly valve with manual gear box Series BUW9-SSR2S-G

ATEX II 2 G/D Ex h X; Wafer type; Double eccentric; Length According to EN558−1R20; Body, Disc 1.4408; Shaft 1.4542; Seat RTFE/Inconel 625-Graphite; Medium temperature -10...+230°C; Pressure range 0...25bar; Fire-safe

Butterfly valve with manual gear box Series BUW9-SSR2S-G-A

Wafer type; Double eccentric; Length According to EN558−1R20; Body Steel Epoxy coated; Disc 1.4408; Shaft 1.4542; Seat RTFE; Pressure range 0...25bar; Medium temperature -10...+230°C

Butterfly valve with manual gear box Series BUW-CSR-G

;ATEX II 2 G/D Ex h X; Wafer type; Double eccentric; Length According to EN558−1R20; Body Steel Epoxy coated; Disc 1.4408; Shaft 1.4542; Seat Inconel 625; Medium temperature -10...+425°C; Pressure range 0...25bar

Butterfly valve with bare shaft Series BUW9-CSIS-B-A

Lug type; Double eccentric; Length According to EN558−1R20; Body, Disc 1.4408; Shaft 1.4542; Seat RTFE; Medium temperature -10...+230°C; Pressure range 0...25bar

Butterfly valve with bare shaft Series BUL-SSRS-B

Lug type; Double eccentric; Length According to EN558−1R20; Body, Disc 1.4408; Shaft 1.4542; Seat RTFE; Medium temperature -10...+230°C; Pressure range 0...25bar

Butterfly valve with hand lever Series BUL-SSRS-L

ATEX II 2 G/D Ex h X; Wafer type;Double eccentric; Length According to EN558−1R20; Body, Disc 1.4408; Shaft 1.4542; Seat Inconel 625; Medium temperature -10...+425°C; Pressure range 0...25bar; ATEX II 2 G/D c TX

Butterfly valve with bare shaft Series BUW9-SSIS-B-A

ATEX II 2 G/D Ex h X; Wafer type;Double eccentric; Length According to EN558−1R20; Body And Disc 1.4408, Shaft 1.4542; Seat Inconel 625; Medium temperature -10...+425°C; Pressure range 0...25bar

Butterfly valve with hand lever Series BUW9-SSIS-L-A

; Body Cast iron; Protection class IP67; ATEX Area 1/21

Gear box

Wafer type; Length According to EN558−1R20; Body Carbon steel A216-WCB; Disc 1.4408; Shaft 1.4016; Liner EPDM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+130°C; Pressure range 0...16bar

Butterfly valve with bare shaft Series BUW6-CSE-B

; Body Aluminum; Protection class IP65

Gear box

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+100°C; Pressure range 0...16bar; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BUW6-DSN-B-3C

; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner NBR; Medium temperature -10...+100°C

Butterfly valve with bare shaft Series BULA-B, BULG-B, BULC-B, BULY-B

; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner EPDM; Medium temperature -10...+130°C

Butterfly valve with bare shaft Series BUL1-DSE-B, BULA-DSE-B, BULG-DSE-B, BULC-DSE-B, BULY-DSE-B

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner EPDM; Nominal flange pressure PN25; Medium temperature -10...+130°C; Pressure range 0…25bar

Butterfly valve with hand lever Series BUWV-DSE-L

; PN40; Bellow; Body Steel; Seat, Cone, Stem Stainless steel 1.4021; Handwheel Steel; Packing gland Graphite; Back seal; Metal sealing; Non rising stem; Medium temperature -10...+400°C

Globe valve Series GL146

; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15; Disc 1.4408; Shaft 1.4016; Liner EPDM; Medium temperature -10...+130°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BUL-B-3C

Wafer type; Double eccentric; Length According to EN558−1R20; Body Steel Epoxy coated; Disc 1.4408; Shaft 1.4542; Seat Inconel 625; Medium temperature -10...+425°C; Pressure range 0...25bar; ; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BUW9-CSIQ-B

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4542 PTFE-coated; Shaft 1.4408; Liner PTFE/silicone; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+190°C; Pressure range 0...10bar; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BUW4-DZTS-B

Body Steel; Stem seal Graphite; Medium temperature -20...+350°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Needle valve Series GL010-3C

Body Steel; Stem seal Graphite; Medium temperature -20...+400°C; Pressure range 0...630bar; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Globe valve Series GL150-3C

ATEX II 2 G/D Ex h X; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner FKM; Medium temperature -10...+200°C

Butterfly valve with bare shaft Series BULG-DSV-B-A, BULC-DSV-B-A, BULY-DSV-B-A

ATEX II 2 G/D Ex h X; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner EPDM; Medium temperature -10...+130°C

Butterfly valve with bare shaft Series BULG-DSE-B-A, BULC-DSE-B-A, BULY-DSE-B-A

Wafer type; Length According to EN558−1R20; Body Carbon steel A216-WCB Epoxy coated; Disc And Shaft 1.4408; Liner PTFE/silicone; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+190°C; Pressure range 0...10bar

Butterfly valve with bare shaft Series BUW4-CSTS-B

Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc And Shaft 1.4408; Liner PTFE/silicone; Medium temperature -10...+190°C; Pressure range 0...10bar

Butterfly valve with hand lever Series BUL-DSTS-L

Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc And Shaft 1.4408; Liner PTFE/silicone; Medium temperature -10...+190°C

Butterfly valve with bare shaft Series BUL-DSTS-B

Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc And Shaft 1.4408; Liner PTFE/silicone; Medium temperature -10...+190°C; Pressure range 0...10bar

Butterfly valve with manual gear box Series BUL-DSTS-G

ATEX II 2 G/D Ex h X; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc And Shaft 1.4408; Liner PTFE/silicone; Medium temperature -10...+190°C; Pressure range 0...10bar

Butterfly valve with hand lever Series BUL-DSTS-L-A

; Body Cast iron; Protection class IP67; ATEX Area 1/21; Low temperature design down to -40°C ambient temperature

Gear box

Mounting bracket Series MKS-AR

ATEX zone 2 and 22; Wafer type; Rising stem; Body 1.4408; Gate 1.4401; Soft sealed EPDM; Packing PTFE-Synthetic/EPDM; Nominal flange pressure PN10; Sealed in both directions; Medium temperature -5...+90°C

Knife gate valve with handwheel Series AB1V

Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Medium temperature -10…+130°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with hand lever Series BULG-L-3C, BULC-L-3C, BULY-L-3C

; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner EPDM; Medium temperature -10...+130°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness; Certificate TR CU; With valve pass And Verify Safety

Butterfly valve with bare shaft Series BUL-DSE-B-3D

ATEX II 2 G/D Ex h X; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner EPDM; Medium temperature -10...+130°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness; Certificate TR CU; With valve pass And Verify Safety

Butterfly valve with bare shaft Series BULG-DSE-B-A, BULC-DSE-B-A, BULY-DSE-B-A

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+100°C; Pressure range 0...16bar; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BUW6-DN-B

; PN40; Body Steel; Seat, Cone, Stem Stainless steel 1.4021; Handwheel Steel; Packing gland Graphite; Back seal; Metal sealing; Non rising stem; Medium temperature -10…+400°C; Incl. Inspection certificate EN-10204-3.1 For material, pressure, function and tightness; ATEX-design

Globe valve Series GL130-A-3C

ATEX II GD Ex h X; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner FKM; Medium temperature -10...+200°C Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness; Certificate TR CU; With valve pass And Verify Safety

Butterfly valve with bare shaft Series BULG-DSV-B-A3D, BULC-DSV-B-A3D, BULY-DSV-B-A3D

ATEX II 2 G/D Ex h X; Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc And Shaft 1.4408; Liner PTFE/silicone; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+190°C; Pressure range 0...10bar

Butterfly valve with hand lever Series BUW4-DSTS-L

; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner NBR; Medium temperature -10...+100°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BUL1-DSN-B, BULA-DSN-B, BULG-DSN-B, BULC-DSN-B, BULY-DSN-B

; Lug type; Length According to EN558−1R20; Body Steel Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner NBR; Medium temperature -10...+100°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BUL1-CSN-B, BULA-CSN-B, BULG-CSN-B, BULC-CSN-B, BULY-CSN-B

; Lug type; Length According to EN558−1R20; Body Steel Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner FKM; Medium temperature -10...+200°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BUL1-CSN-B, BULA-CSN-B, BULG-CSN-B, BULC-CSN-B, BULY-CSN-B

Body Nickel plated brass; Knurled screw Fibre-glass-reinforced polyamide; Drain hole; Medium temperature Max. +90°C; Pressure range 0...10bar

Globe valve Series GL011

Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016;Liner EPDM; Medium temperature -10…+130°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness; Certificate TR CU; With valve pass And Verify Safety

Butterfly valve with hand lever Series BULG-L-3D, BULC-L-3D, BULY-L-3D

Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner EPDM; Medium temperature -10…+130°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness; Certificate TR CU; With valve pass And Verify Safety

Butterfly valve with bare shaft Series BULG-B-3D, BULC-B-3D, BULY-B-3D

; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4401; Liner NBR; Medium temperature -10...+100°C

Butterfly valve with bare shaft Series BULA-DSNS-B, BULG-DSNS-B, BULC-DSNS-B, BULY-DSNS-B

; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4401; Liner NBR; Medium temperature -10...+100°C

Butterfly valve with hand lever Series BULA-DSNS-L, BULG-DSNS-L, BULC-DSNS-L, BULY-DSNS-L

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4401; Liner EPDM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+130°C; Pressure range 0...16bar

Butterfly valve with hand lever Series BUW6-DSES-L

Wafer type; Length According to EN558−1R20; Body Carbon steel A216-WCB; Disc 1.4408; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+100°C; Pressure range 0...16bar

Butterfly valve with bare shaft Series BUW6-CSN-B

Wafer type; Length According to EN558−1R20; Body Carbon steel A216-WCB; Disc 1.4408; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -25...+100°C; Pressure range 0...16bar; Notch impact test; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BUW6-CSN-B-3E

Wafer type; Length According to EN558−1R20; Body Carbon steel A216-WCB; Disc 1.4408; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -25...+100°C; Pressure range 0...16bar; Notch impact test; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with hand lever Series BUW6-CSN-L-3E

Wafer type; DVGW-gas-approved; Length According to EN558−1R20; Body Carbon steel A216-WCB; Disc 1.4408; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -25...+60°C; Pressure range 0...16bar; Notch impact test; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BUW6-CSD-B-3E

Wafer type; DVGW-gas-approved; Length According to EN558−1R20; Body Carbon steel A216-WCB; Disc 1.4408; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -25...+60°C; Pressure range 0...16bar; Notch impact test; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with hand lever Series BUW6-CSD-L-3E

Wafer type; DVGW-gas-approved; Length According to EN558−1R20; Body Carbon steel A216-WCB; Disc 1.4408; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -25...+60°C; Pressure range 0...16bar; Notch impact test; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with manual gear box Series BUW6-CSD-G-3E

; Lug type; Length According to EN558−1R20; Body; Disc And Shaft 1.4408; Liner NBR; Medium temperature -10...+100°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BUL1-SSNS-B-3C, BULA-SSNS-B-3C, BULG-SSNS-B-3C, BULC-SSNS-B-3C, BULY-SSNS-B-3C

; PN6; Body Cast iron EN-GJL-250; Seat, Cone, Stem Stainless steel 1.4021; Handwheel Steel; Packing gland Graphite; Back seal; Metal sealing; Rising stem; Body Painted RAL5013 (Cobalt blue) Thickness 40µm; Medium temperature -10...+300°C; Pressure range 0...6bar

Globe valve Series GL151

Wafer type; Rising stem; Body Cast iron EN-GJL-250/Ductile iron EN-GJS-500-7; Gate 1.4301; Soft sealed FKM; Packing PTFE-Synthetic/FKM; Screws Stainless steel; Nominal flange pressure PN10; Unidirectional sealed; Medium temperature 0...+120°C

Knife gate valve with handwheel Series A1V2H3-5V-B

Lug type; DVGW-gas-approved;Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner NBR; Medium temperature -10...+60°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BULG-B-3C-DVGW, BULC-B-3C-DVGW

Wafer type; Rising stem; Body Cast iron EN-GJL-250/Ductile iron EN-GJS-500-7; Gate 1.4301; Soft sealed FKM; Packing PTFE-Synthetic/FKM; Nominal flange pressure PN10; Unidirectional sealed; Medium temperature 0...+120°C

Knife gate valve with handwheel Series A1V2H3-5V

Lug type; Rising stem; Body Cast iron EN-GJL-250/Ductile iron EN-GJS-500-7; Gate 1.4301; Soft sealed EPDM; Packing PTFE-Synthetic/EPDM; Nominal flange pressure PN10; Unidirectional sealed; Medium temperature 0...+90°C

Knife gate valve with handwheel Series AL1V2H-5-B

Wafer type; Length According to EN558−1R20; Body Carbon steel A216-WCB; Disc 1.4408; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -25...+100°C; Pressure range 0...16bar; Notch impact test; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with manual gear box Series BUW6-CSN-G-3E

Wafer type; DVGW-gas-approved; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+60°C; Pressure range 0...16bar; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BUW6-DSD-B-3C

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner Silicone; Medium temperature -10...+190°C

Butterfly valve with bare shaft Series BUW1-DSS-B, BUW2-DSS-B, BUW6-DSS-B, BUWC-DSS-B, BUWV-DSS-B, BUWZ-DSS-B

; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Shaft 1.4016; Liner EPDM; Medium temperature -10...+130°C

Butterfly valve with bare shaft Series BUL1-DPE-B, BULA-DPE-B, BULG-DPE-B, BULC-DPE-B, BULU-DPE-B, BULY-DPE-B

; ATEX Ex II 2GD c TX; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15; Disc 1.4408; Shaft 1.4016; Liner EPDM; Medium temperature -10...+130°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BUL-B-A3C

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner EPDM White; Medium temperature -10...+130°C

Butterfly valve with bare shaft Series BUW1-DSW-B, BUW2-DSW-B, BUW4-DSW-B, BUW6-DSW-B, BUWC-DSW-B, BUWV-DSW-B, BUWZ-DSW-B

Lug type; Double eccentric; Length According to EN558−1R20; Body Steel Epoxy coated; Disc 1.4408; Shaft 1.4542; Seat RTFE; Medium temperature -10...+230°C; Pressure range 0...25bar

Butterfly valve with bare shaft Series BUL-CSR-B

ATEX II 2 G/D Ex h X; Lug type; Double eccentric; Length According to EN558−1R20; Body Steel Epoxy coated; Disc 1.4408; Shaft 1.4542; Seat RTFE; Medium temperature -10...+230°C; Pressure range 0...25bar

Butterfly valve with bare shaft Series BUL-CSR-B-A

Lug type; Double eccentric; Length According to EN558−1R20; Body Steel Epoxy coated; Disc 1.4408; Shaft 1.4542; Seat RTFE; Medium temperature -10...+230°C; Pressure range 0...25bar

Butterfly valve with manual gear box Series BUL-CSR-G

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc And Shaft 1.4408; Liner PTFE/silicone; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+190°C; Pressure range 0...10bar; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BUW4-DZTS-B

Lug type; Double eccentric; Length According to EN558−1R20; Body Steel Epoxy coated; Disc 1.4408; Shaft 1.4542; Seat RTFE; Medium temperature -10...+230°C; Pressure range 0...25bar

Butterfly valve with hand lever Series BUL-CSR-L

ATEX II 2 G/D Ex h X; Lug type; Double eccentric; Length According to EN558−1R20; Body Steel Epoxy coated; Disc 1.4408; Shaft 1.4542; Seat RTFE; Medium temperature -10...+230°C; Pressure range 0...25bar

Butterfly valve with manual gear box Series BUL-CSR-G-A

ATEX II 2 G/D Ex h X; Wafer type; Double eccentric; Length According to EN558−1R20; Body Steel Epoxy coated; Disc 1.4408; Shaft 1.4542; Seat RTFE; Nominal flange pressure PN10/16/25/ANSI150; Medium temperature -10...+230°C; Pressure range 0...25bar

Butterfly valve with hand lever Series BUW9-CSRS-L-A

ATEX II 2 G/D Ex h X; Wafer type; Double eccentric; Length According to EN558−1R20; Body Steel Epoxy coated; Disc 1.4408; Shaft 1.4542; Seat RTFE; Medium temperature -10...+230°C; Pressure range 0...25bar

Butterfly valve with manual gear box Series BUW-CSR-G-A

ATEX II 2 G/D Ex h X; Lug type; Double eccentric; Length According to EN558−1R20; Body Steel Epoxy coated; Disc 1.4408; Shaft 1.4542; Seat RTFE; Medium temperature -10...+230°C; Pressure range 0...25bar

Butterfly valve with hand lever Series BUL-CSR-L-A

Body Stainless steel 1.4571; Stem seal PTFE; Medium temperature -20...+250°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Needle valve Series 110VA-NPT-3C

Bellow; PN16; Body Cast iron EN-GJL-250; Seat, Cone, Stem Stainless steel 1.4021; Handwheel Steel; Packing gland Graphite; Back seal; Metal sealing; Non rising stem; Medium temperature -10...+300°C; Incl. Inspection certificate EN-10204-3.1 For material, pressure, function and tightness

Globe valve Series GL122-W-3C

; PN40; With bellows; Body 1.4408; Seat, Cone, Stem Stainless steel 1.4401; Handwheel Steel; Packing gland Graphite; Back seal; Metal sealing; Rising stem; Medium temperature -10..+400°C; Incl. Inspection certificate EN-10204-3.1 For material, pressure and tightness

Globe valve Series GL116-W-3C

; Length According to EN558-1R26 Body Cast steel; Nominal flange pressure PN40; Handwheel Steel; Packing gland Graphite; Rising stem; Medium temperature -10...+400°C; Pressure range 0...40bar

Gate valve with handwheel Series GA001

ATEX II 2 G/D Ex h X; Wafer type; Double eccentric; Length According to EN558−1R20; Body, Disc 1.4408; Shaft 1.4542; Seat RTFE; Medium temperature -10...+230°C; Pressure range 0...25bar

Butterfly valve with manual gear box Series BUW-SSR-G-A

; PN40; Body 1.4408; Seat, Cone, Stem Stainless steel 1.4401; Handwheel Steel; Packing gland Graphite; Back seal; Metal sealing; Non rising stem; Medium temperature -10..+400°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Globe valve Series GL123-3C

; PN40; With control cone; ATEX-design; Body 1.4408; Seat, Cone, Stem Stainless steel 1.4401; Handwheel Steel; Packing gland Graphite; Back seal; Metal sealing; Non rising stem; Medium temperature -10..+400°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Globe valve Series GL123-AC-3C

; Control cone Body 1.4408; Seat, Cone, Stem Stainless steel 1.4401; Seat seal PTFE; Handwheel Steel; Packing gland Graphite; Back seal; Metal sealing; Non rising stem; Medium temperature -20..+180°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Globe valve Series GL123-A-013C

ATEX II 2 G/D Ex h X; Lug type; Double eccentric;Double eccentric; Length According to EN558−1R20; Body, Disc 1.4408; Shaft 1.4542; Seat RTFE; Medium temperature -10...+230°C; Pressure range 0...25bar

Butterfly valve with bare shaft Series BUL-SSRS-B

ATEX II 2 G/D Ex h X; Lug type;Double eccentric; Length According to EN558−1R20; Body, Disc 1.4408; Shaft 1.4542; Seat RTFE; Medium temperature -10...+230°C; Pressure range 0...25bar

Butterfly valve with manual gear box Series BUL-SSR-G-A

Lug type; Double eccentric; Length According to EN558−1R20; Body, Disc 1.4408; Shaft 1.4542; Seat RTFE; Medium temperature -10...+230°C; Pressure range 0...25bar

Butterfly valve with manual gear box Series BUL-SSR-G

; Length According to EN558-1R14; Body EN-GJS-500-7; Wedge EPDM rubberized; Handwheel EN-GJS-500-7; Packing NBR; Non rising stem; Medium temperature -10...+90°C; Pressure range 0...16bar

Gate valve with hand wheel Series GA032

; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner EPDM; Medium temperature -10...+130°C

Butterfly valve with hand lever Series BULY-DSE-L

; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner EPDM; Medium temperature -10...+130°C; Flange thread UNC

Butterfly valve with hand lever Series BULY-DSE-L

Body Stainless steel 1.4408; Seal PTFE; Handwheel Aluminum; Stem seal PTFE; Medium temperature -20...+150°C; Pressure range 0...16bar; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Angle seat-Globe valve Series GA112

Body Stainless steel 1.4408; Seal PTFE; Handwheel Aluminum; Stem seal PTFE; Medium temperature -20...+150°C; Pressure range 0...16bar; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Angle seat-Globe valve Series GL112-3E

Body Stainless steel 1.4408; Seal PTFE; Handwheel Aluminum; Stem seal PTFE; Medium temperature -20...+150°C; Pressure range 0...16bar

Angle seat-Globe valve Series GL112

Body Stainless steel 1.4571; Stem seal PTFE; Medium temperature -20...+250°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Needle valve Series GL009-W-3C

; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner Silicone; Medium temperature -10...+190°C

Butterfly valve with bare shaft Series BUL1-DSS-B, BULA-DSS-B, BULG-DSS-B, BULC-DSS-B, BULY-DSS-B

Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4404; Liner PTFE/silicone; Medium temperature -10...+190°C

Butterfly valve with bare shaft Series BULC-DSTS-B

; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15; Disc 1.4408; Shaft 1.4016; Liner EPDM; Medium temperature -10...+130°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BUL-B-3C

; ATEX Ex II 2GD c TX; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner FKM; Medium temperature -10...+200°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BUL-B-A3C

ATEX II 2 G/D Ex h; Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Shaft 1.4016; Liner EPDM; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+130°C; Pressure range 0...16bar

Butterfly valve with bare shaft Series BUW6-DE-b-A

; Wafer type; Length According to EN558−1R20; For abrasive medias (e.g. sand, cement, etc.); Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc Zinc plated ductile iron EN-GJS-400-15; Shaft 1.4016; Liner Carboxylated NBR; Medium temperature -10...+100°C

Butterfly valve with bare shaft Series BUW-DPC

; Lug type; Length According to EN558−1R20; Body Steel Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner NBR; Medium temperature -10...+100°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness; Incl. Notch impact test

Butterfly valve with bare shaft Series BUL1-CSN-B, BULA-CSN-B, BULG-CSN-B, BULC-CSN-B, BULY-CSN-B

Wafer type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner EPDM; Nominal flange pressure PN6; Medium temperature -10...+130°C; Pressure range 0...6bar

Butterfly valve with hand lever Series BUW1-DSE-L

ATEX II 2 G/D Ex h X ; Wafer type; Length According to EN558−1R20; Body, Disc And Shaft 1.4408; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+100°C; Pressure range 0...16bar

Butterfly valve with bare shaft Series BUW6-SSNS-B

ATEX II 2 G/D Ex h X ; Wafer type; Length According to EN558−1R20; Body, Disc And Shaft 1.4408; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+100°C; Pressure range 0...16bar; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BUW6-SSNS-B-3C

Wafer type; DVGW-gas-approved; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc 1.4408; Shaft 1.4016; Liner NBR; Nominal flange pressure PN10/16/ANSI150; Medium temperature -10...+60°C

Butterfly valve with manual gear box Series BUW6-DSD-G

Body Stainless steel 1.4571; Stem seal PTFE; Medium temperature -20...+250°C

Needle valve Series 110VA

; Body EN-GJS-500-7; Guide rods Zinc plated steel

Double flange telescopic tube Series 44A

Flanged type PN16; Material Rubber EPDM, Flange Zinc plated steel; Temperature range -10...+115°C

Rubber-Compensator Series 41A

; Lug type; Length According to EN558−1R20; Body; Disc And Shaft 1.4408; Liner EPDM; Medium temperature -10...+130°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with bare shaft Series BUL-SSES-B-3C01

Lug type; Length According to EN558−1R20; Body; Disc And Shaft 1.4408; Liner EPDM; Medium temperature -10...+130°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Butterfly valve with hand lever Series BULY-L-3C01

; Lug type; Length According to EN558−1R20; Body Ductile iron EN-GJS-400-15 Epoxy coated; Disc Aluminium-bronze; Shaft 1.4016; Liner EPDM; Medium temperature -10...+130°C

Butterfly valve with bare shaft Series BUL.-B