Shop | STASTO Automation

hoses, tubes, manometer and accessories

View all

female thread; stainless steel AISI 303; seal FKM; temperature max. 200°C

coupling for shut-off coupling plug according toISO 7241-1 series B

female thread; stainless steel AISI 303; seal FKM; temperature max. 200°C

coupling plug shut-off according to ISO 7241-1 series B

temperature range -30...+70°C; operating pressure 20bar

hose for gas welding series GW

material PVC; colour transparent; with embedded hard PVC spiral white; temperature range -15...+60°C

suction- and pressure hose series SPRS

material polyamide; multiplier for operating pressure 30°C = 0,87 / 80°C = 0,43; without fittings; temperature range -60...100°C; colour black/blue

2-fold spiral hose series PA-02W-SP

material polyamide; multiplier for operating pressure 30°C = 0,87 / 80°C = 0,43; swivel fittings on both sides; antikink; temperature range -60...130°C; colour blue

spiral hose series PA-SP

axial; material polyurethane; multiplier for operating pressure 30°C = 0,86 / 60°C = 0,62; without fittings; temperature range -35...60°C; colour black/blue

2-fold spiral hose series PU-02W-SP

zinc plated steel

1-ear hose clip series HC01

stainless steel AISI 304

1-ear hose clip series HC01

according to DIN 16271; spigot/swivel sleeve, shaft for holder of measuring instruments with test spigot M20x1,5; seal PTFE

manometer stop-valve

jet hole 3mm; suitable for pistols series S-26, S-23

extension air-nozzle curved

jet hole 3mm; suitable for pistols series S-26, S-23

extension air-nozzle straight

other materiales - P06

material aluminum painted black; 3 inlets with femal thread; outlets female thread; one-sided

distributor series DI19

Ø 80mm; accuracy 0,5% of full pressure range; connection 1/4" below; capturing pressure peaks; battery life time cycle 4000 hours; seal NBR

manometer - digital type series MA054

body stainless steel; measuring unit, motion work stainless steel AISI 316Ti; front glass flat instrument glass; ambient temperature -20...+60°C; medium temperature max. +100°C; connection below; class 1,6

capsule manometer series MA046-B

capsule manometer series MA046-R

body stainless steel AISI 304; measuring unit AISI 316L; front glass flat instrument glass; ambient temperature -40...+60°C; medium temperature max. +200°C; connection rear

bourdon tube manometer series MA029-R

body stainless steel AISI 304; measuring unit AISI 316L; front glass flat instrument glass; ambient temperature -40...+60°C; medium temperature max. +200°C; connection below

bourdon tube manometer series MA029-B

body AISI 304; measuring unit, motion work brass; front glass mineral glass; front ring; ambient temperature -20...+60°C; medium temperature max. +60°C; connection below; class 1,0

bourdon tube manometer series MA050

body AISI 304; measuring unit, motion work brass; front glass mineral glass; front ring; ambient temperature -20...+60°C; medium temperature max. +60°C; connection rear; class 1,0; diameter 100mm; indicating range 0-400; unit bar; connection 1/2"

bourdon tube manometer series MA050

for wall mounting of stop valves for manometers

holder for measuring instruments according to DIN 16281 series HMI

according to DIN 16281

adapter for holder of measuring instruments series A-HMI

body sheet steel; measuring unit, motion work copper based alloy; front glass glass; ambient temperature -20...+60°C; medium temperature max. +60°C; connection below; class 1,6

bourdon tube manometer

body sheet steel; measuring unit, motion work copper based alloy; front glass glass; ambient temperature -20...+60°C; medium temperature max. +60°C; connection rear; class 1,6

bourdon tube manometer

bourdon tube manometer; body stainless steel AISI 304; measuring unit AISI 316L; front glass flat instrument glass; ambient temperature -20...+60°C; medium temperature max. +100°C; connection rear

glycerin manometer series MA030-R

bourdon tube manometer; body stainless steel AISI 304; measuring unit AISI 316L; front glass flat instrument glass; ambient temperature -20...+60°C; medium temperature max. +100°C; connection below

glycerin manometer series MA030-B

bourdon tube manometer; body stainless steel; front ring stainless steel bright; measuring unit, motion work copper based alloy; front glass acryl; ambient temperature -20...+60°C; medium temperature max. +60°C; connection rear

glycerin manometer series MA038-R

body stainless steel AISI 304; measuring unit, motion work copper based alloy; front glass mineral glass; connection below; ambient temperature -40...+60°C; medium temperature max. +60°C; class 1,0

bourdon tube manometer series MA036-B

measuring unit, motion work copper based alloy; front glass mineral glass; connection rear; ambient temperature -20...+60°C; medium temperature max. +60°C; class 1,0

bourdon tube manometer series MA036-R

zinc plated steel bandwidth 9mm

jaw clamp series SBS

material: 1.4016; screw zinc plated steel

hinge bolt clamp series SSB-ES

body sheet steel; measuring unit, motion work copper based alloy; front glass acryl; ambient temperature -20...+60°C; medium temperature max. +60°C; connection below

bourdon tube manometer series MA081

safety version EN837-1 S3; break-proofed separating plate; blow-out back; body stainless steel measuring unit, motion work stainless steel AISI 316Ti; front glass laminated safety glass; ambient temperature -40...+60°C; medium temperature max. +200°C; connection below

bourdon tube manometer series MA073

body stainless steel; measuring unit, motion work brass; front glass mineral glass; ambient temperature -20...+60°C; medium temperature max. +100°C; connection 1/2" below; class 1,6

capsule manometer series MA031

material: 1.4301; screw zinc plated steel

hinge bolt clamp series SSB-ES-2A

bourdon tube manometer; electrical indicator (magnetic spring contact); body stainless steel AISI 304; measuring unit, motion work copper based alloy; front glass acryl; ambient temperature -20...+60°C; medium temperature max. +60°C; magnetic spring contact for open/close of electric circuits depending on pointer position; connection 1/2" below; class 1,0

manometer with electrical contact

bourdon tube manometer; measuring unit, motion work copper based alloy; front glass mineral glass; ambient temperature -20...+60°C; medium temperature max. +60°C; class 1,0; connection below

glycerin manometer

bourdon tube manometer; body stainless steel; front ring stainless steel bright; measuring unit, motion work copper based alloy; front glass acryl; ambient temperature -20...+60°C; medium temperature max. +60°C; connection below

glycerin manometer series MA038-B

material AISI 304; operating pressure max. 16bar

distributor series DI24

bourdon tube manometer; body, front ring stainless steel AISI 304; measuring unit AISI 316L; front glass mineral glass; ambient temperature -40...+60°C; medium temperature max. +100°C; connection rear; class 1,6

glycerin manometer

bourdon tube manometer; safety version EN837-1 S3; break-proofed separating plate; blow-out back; body stainless steel AISI 304; measuring unit stainless steel AISI 316L; motion work stainless steel AISI 316Ti; front glass laminated safety glass; ambient temperature -20...+60°C; medium temperature max. +100°C; connection below

glycerin manometer series MA082-B

; series MA087; bourdon tube manometer; body, ring stainless steel AISI 304; measuring unit, motion work copper based alloy; front glass flat instrument glass; ambient temperature -20...+60°C; medium temperature max. +60°C; parallel connection 1/2" below; class 1,6

differential pressure manometer

body, ring stainless steel; front glass flat instrument glass; stem Ø 8mm, stainless steel AISI 316Ti; connection below; flat with spigot ø 15mm; class 1,0

bimetallic thermometer series TH010

bourdon tube manometer; safety version EN837-1 S3; break-proofed separating plate; blow-out back; body stainless steel AISI 304; measuring unit stainless steel AISI 316L; motion work stainless steel AISI 316Ti;front glass laminated safety glass; ambient temperature -20...+60°C; medium temperature max. +100°C; connection rear

glycerin manometer series MA082-B

bourdon tube manometer; body stainless steel AISI 304; measuring unit AISI 316L; front glass polycarbonat; ambient temperature -20...+60°C; medium temperature max. +100°C; connection rear; class 1,6

glycerin manometer series MA030-R

glycerin manometer series MA030-B

body stainless steel AISI 304; measuring unit AISI 316L; front glass flat instrument glass; ambient temperature -40...+60°C; medium temperature max. +200°C; connection rear

bourdon tube manometer series MA029-R

material aluminum; outlets one-sided

distributor series DI25

material polyamide; multiplier for operating pressure 30°C = 0,87 / 80°C = 0,47; vacuum -0,87bar; temperature range -60...100°C

plastic hose series PA

bourdon tube manometer with glycerin filling ; body, bajonet ring stainless steel; measuring unit, motion work copper based alloy; front glass mineral glass; ambient temperature -20...+60°C; medium temperature max. +60°C; connection 1/2" below

manometer - sensitive type series MA043-B

material PFA; multiplier for operating pressure 100°C = 0,60 / 200°C = 0,35; temperature max. 250°C; colour transparent-white

plastic hose series PFA

body stainless steel AISI 304; front ring 3-square; mounting clamp; measuring unit stainless steel AISI 316; motion work stainless steel AISI 316Ti; front glass flat instrument glass; ambient temperature -40...+60°C; medium temperature max. +200°C

bourdon tube manometer series MA091-R

body, ring stainless steel; measuring unit stainless steel; front glass laminated safety glass; ambient temperature -20...+60°C; medium temperature max. +100°C; overload 5 x value of scale, max. 40bar; seal FKM; connection 1/2" below; test flange Ø 100mm; class 1,6

manometer - chemical diaphragm type

material polyamide; multiplier for operating pressure 30°C = 0,87 / 80°C = 0,43; vacuum -0,87bar; temperature range -60...130°C; delivered on drum

plastic hose series PA

according to DIN 2391/C; EN 10305-4; outside galvanic zinc plated; blue chromium plated; inside bright; eddy current approved; material St37.4 white-zinc plated; incl. inspection certificate EN-10204-3.1; for material

seamless steel pipe white-zinc plated

material PTFE; multiplier for operating pressure 100°C = 0,65 / 200°C = 0,35; temperature range -60...250°C

plastic hose series PT

bourdon tube manometer; electrical indicator (magnetic spring contact); body stainless steel AISI 304; measuring unit AISI 316L; motion work , connection stainless steel AISI 316Ti; front glass flat instrument glass; ambient temperature -40...+60°C; medium temperature max. +200°C; Contact M21, 2 magnetic spring contact for open/close of electric circuits depending on pointer position; connection 1/2" below; class 1,0; filled with silicone oil

manometer with electrical contact

material polyurethane; multiplier for operating pressure 30°C = 0,9 / 60°C = 0,65; vacuum -0,87bar; temperature range -35...60°C; delivered on drum

plastic hose series PU

to screw for high quality type; connection 1/2"; seal collar Ø 15mm;

protecting tube

material polyurethane; operating pressure at 23°C 12bar; multiplier for operating pressure 60°C = 0,47; swivel fittings on both sides; antikink; incl. coupling, coupling plug DN 7,2; brass; temperature range -40...60°C; colour blue

spiral hose series PU-SPAC72

body steel painted; mounting position standing

compressed air tank series AT04

material PA6 HL; multiplier for operating pressure 30°C = 0,83 / 80°C = 0,48; vacuum -0,87bar; temperature range -60...130°C

plastic hose series PA6R

material silicone; temperature range -60...200°C; for the pressureless passage of liquids and gases

plastic hose series SI

according to DIN 2391/C; DIN 2445-2/DIN 1630; EN 10305-4; phosphated; eddy current approved; material St37.4; incl. inspection certificate EN-10204-3.1; for material

seamless steel pipe bright

high flexible; oil resistant; material soft-PVC; operating pressure at 23°C 16bar; multiplier for operating pressure 90°C = 0,375; temperature range -20...90°C; colour blue; antistatic

fabric hose for compressed air series PV07-S

high flexible; material soft-PVC; operating pressure at 23°C 15bar; temperature range -20...60°C; colour blue

fabric hose for compressed air series PV05

material soft-PVC; temperature range -15...60°C

fabric hose, material PVC series PV08

according to EN ISO 1127 DIN 17456/58; heat treated; pickled; tolerance class D4/T3, according to DIN 2391 suitable for fittings; material AISI 316Ti; incl. inspection certificate EN-10204-3.1 for material

seamless stainless steel pipe

glycerin manometer series MA009-B

body stainless steel; measuring unit, motion work brass; front glass acryl; ambient temperature -20...+60°C; medium temperature max. +80°C; 10 times overload; connection below; class 1,6

capsule manometer series MA035

body sheet steel, front ring 3-square chromium-plated; mounting clamp; measuring unit, motion work copper based alloy; front glass acryl; ambient temperature -20...+60°C; medium temperature max. +60°C; connection rear; class 1,6

bourdon tube manometer

body stainless steel; measuring unit, motion work brass; front glass acryl; ambient temperature -20...+60°C; medium temperature max. +80°C; 10 times overload; connection rear; class 1,6

capsule manometer series MA035

material soft-PVC; temperature range -15...60°C

fabric hose, material PVC series PV10

body stainless steel AISI 304; measuring unit AISI 316L; front glass flat instrument glass; ambient temperature -40...+60°C; medium temperature max. +200°C; connection below

bourdon tube manometer series MA029-B

water hose; temperature range -20...60°C

fabric hose, material PVC series PV13

material brass; outlets female thread; 4 outlets, one-sided

distributor series VT

body stainless steel AISI 304; operating pressure max. 11bar; according to directive 2014/68/EU (pressure equipment directive, PED); mounting position horizontal

compressed air tank series AT03

bourdon tube manometer; body stainless steel AISI 304; measuring unit stainless steel AISI 316; connection stainless steel AISI 316Ti; front glass flat instrument glass; ambient temperature -20...+60°C; medium temperature max. +200°C; connection below; Contact I21, 2 inductive proximity switches; Namur Ex II 2 G EEx ia IIC T6; 1. contact opens, 2. contact closes depending on the pointer position; switch amplifier required

manometer with electrical contact

diaphragm type; body stainless steel AISI 303; measuring unit, connection stainless steel AISI 316Ti; front glass flat instrument glass; ambient temperature -20...+60°C; medium temperature max. +100°C; overload 5 x value of scale, max. 40bar; seal NBR; connection 1/2" below; class 1,6; Contact I21, 2 inductive proximity switches; Namur Ex II 2 G EEx ia IIC T6; 1. contact opens, 2. contact closes depending on the pointer position; switch amplifier required

manometer with electrical contact

body stainless steel AISI 303; measuring unit, connection stainless steel AISI 316Ti; front glass flat instrument glass; ambient temperature -20...+60°C; medium temperature max. +100°C; overload 5 x value of scale, max. 40bar; seal NBR; connection 1/2" below; test flange diameter 100mm; class 1,6

manometer - chemical diaphragm type

material polyethylene; multiplier for operating pressure 30°C = 0,83 / 60°C = 0,57; vacuum -0,87bar; temperature range -10...60°C

plastic hose series PE

bourdon tube manometer; body brass, front ring steel polished; front glass acryl; ambient temperature -20...+60°C; medium temperature max. +60°C; connection rear

glycerin manometer series MA075

body sheet steel; measuring unit, motion work copper based alloy; front glass acryl; ambient temperature -20...+60°C; medium temperature max. +60°C; connection rear; class 1,6; free of oil and grease for oxygen

bourdon tube manometer series MA001-oxygen

body plastic; measuring unit, motion work copper based alloy; front glass acryl; ambient temperature -20...+60°C; medium temperature max. +60°C; connection rear

bourdon tube manometer

manometer with electrical contact

body, front ring stainless steel AISI 304; measuring unit stainless steel AISI 316L, motion work, connection stainless steel AISI 316Ti; front glass flat instrument glass; ambient temperature -40...+60°C; medium temperature max. +200°C; connection rear; class 1,6

bourdon tube manometer

stainless steel AISI 304

2-ear hose clip series HC02-I

material: chromium steel AISI 430; screw zinc plated steel

hinge bolt clamp series HC08

STASTO Store

3847 items found.

other materiales - P06

CP-6/4-GR-1

plastic hose; material co-polyurethane; multiplier for operating pressure 30°C = 0,87 / 80°C = 0,43; vacuum -0,87bar; temperature range -40...100°C; outside diameter 6mm; inside diameter 4mm; operating pressure at 23°C 19bar; colour grey

1.31 €

93.015

release aid series SPEEDFIT; plastic; diameter 15mm

1.40 €

PA-6/4,5-BU-0100-YA

plastic hose; material polyamide; < vacuum -0,87bar; temperature range -40...80°C; outside diameter 6mm; inside diameter 4,5mm; operating pressure at 23°C 19bar; colour blue

Not Available For Sale

PA-6/4,5-NA-0100-YA

plastic hose; material polyamide; < vacuum -0,87bar; temperature range -40...80°C; outside diameter 6mm; inside diameter 4,5mm; operating pressure at 23°C 19bar; colour neutral

Not Available For Sale

PC-8/5-CC-0050

plastic hose; material PVC; temperature range -15...60°C; outside diameter 8mm; inside diameter 5mm; operating pressure at 20°C 0bar,short time max. 8,5bar; colour crystal clear; food application design

68.30 €

S-26-SN-01

standard air-nozzle 1,5mm; connection M12x1,25; suitable for blow guns series S-26, S-23; blowing force at a distance of 100mm at 6bar 1,4N; air consumption at 6bar 120Nl/min; noise at a distance of 1m at 6bar 82dB(A); material POM

1.40 €

HC04-11,3/13,3-8,2-H

1-ear hose clip; stainless steel AISI 304L; clamping range 11,3...13,3mm; bandwidth 8,2mm; with insert ring stainless steel AISI 301

1.50 €

PAV2-6/4-YE-1

plastic hose; material polyamide; multiplier for operating pressure 30°C = 0,70 / 40°C = 0,75 / 50°C = 0,65 / 60°C = 0,55; temperature range -20...80°C; outside diameter 6mm; inside diameter 4mm; operating pressure at 23°C 28bar; colour yellow; self-extinguishing; Raw material UL94 V2 certified

1.50 €

PC-14/10-CC-0025

plastic hose; material PVC; temperature range -15...60°C; outside diameter 14mm; inside diameter 10mm; operating pressure at 20°C 0bar,short time max. 6bar; colour crystal clear; food application design

38.30 €

PA-6/4-BK-1000-DYA

plastic hose; material polyamide; multiplier for operating pressure 30°C = 0,87 / 80°C = 0,43; vacuum -0,87bar; temperature range -60...100°C; outside diameter 6mm; inside diameter 4mm; operating pressure at 23°C 28bar; colour black

1,520.00 €

1580N-12

hose clip; screw flight; chromium steel AISI 430; bandwidth 12mm; clamping range 70-90mm

1.60 €

C-SSP04

1.60 €

PC-9/6-CC-0050

plastic hose; material PVC; temperature range -15...60°C; outside diameter 9mm; inside diameter 6mm; operating pressure at 20°C 0bar,short time max. 7,5bar; colour crystal clear; food application design

76.20 €

PF-6/4-NA-1

plastic hose high flexible; material polyamide PA-SFL; outside diameter 6mm; inside diameter 4mm; operating pressure at 30°C 19bar; colour natural

1.60 €

FG-MA001-40R-10-D

front glass suitable for MA001-40R-10-D

1.80 €

PA11P-6/4-NA-1

plastic hose; material polyamide PA11 Rilsan; temperature range -60...130°C; outside diameter 6mm; inside diameter 4mm; operating pressure at 20°C 27bar; colour natural

1.70 €

PA11P-8/6-BK-1

plastic hose; material polyamide PA11 Rilsan PHL; temperature range -40...100°C; outside diameter 8mm; inside diameter 6mm; operating pressure at 20°C 20bar; colour black

1.70 €

PA11P-8/6-BU-1

plastic hose; material polyamide PA11 Rilsan PHL; temperature range -40...100°C; outside diameter 8mm; inside diameter 6mm; operating pressure at 20°C 20bar; colour blue

1.70 €

PA11P-8/6-GN-1

plastic hose; material polyamide PA11 Rilsan PHL; temperature range -40...100°C; outside diameter 8mm; inside diameter 6mm; operating pressure at 20°C 20bar; colour green

1.70 €

PA11P-8/6-RD-1

plastic hose; material polyamide PA11 Rilsan PHL; temperature range -40...100°C; outside diameter 8mm; inside diameter 6mm; operating pressure at 20°C 20bar; colour red

1.70 €

PA11P-8/6-YE-1

plastic hose; material polyamide PA11 Rilsan PHL; temperature range -40...100°C; outside diameter 8mm; inside diameter 6mm; operating pressure at 20°C 20bar; colour yellow

1.70 €

PA-6/3-BK-0050

plastic hose; material polyamide; multiplier for operating pressure 30°C = 0,87 / 80°C = 0,43; vacuum -0,87bar; temperature range -60...100°C; outside diameter 6mm; inside diameter 3mm; operating pressure at 23°C 44bar; colour black

1.70 €

PA-6/3-BK-1

plastic hose; material polyamide; multiplier for operating pressure 30°C = 0,87 / 80°C = 0,43; vacuum -0,87bar; temperature range -60...130°C; outside diameter 6mm; inside diameter 3mm; operating pressure at 23°C 44bar; colour black

1.70 €

PA-6/3-NA-1

plastic hose; material polyamide; multiplier for operating pressure 30°C = 0,87 / 80°C = 0,43; vacuum -0,87bar; temperature range -60...130°C; outside diameter 6mm; inside diameter 4mm; operating pressure at 23°C 28bar; colour natural

1.70 €

PA-8/5-NA-0100

plastic hose; material polyamide; temperature range -60...130°C; outside diameter 8mm; inside diameter 5mm; operating pressure at 23°C 69bar; colour natural

160.40 €

PA-8/6-BK-1000-DYA

plastic hose; material polyamide; multiplier for operating pressure 30°C = 0,87 / 80°C = 0,43; vacuum -0,87bar; temperature range -60...100°C; outside diameter 8mm; inside diameter 6mm; operating pressure at 23°C 19bar; colour black

2,040.00 €

PA-8/6-BU-1000-DYA

plastic hose; material polyamide; multiplier for operating pressure 30°C = 0,87 / 80°C = 0,47; vacuum -0,87bar; temperature range -60...100°C; outside diameter 8mm; inside diameter 6mm; operating pressure at 20°C 19bar; colour blue

2,040.00 €

PA-8/6-BU-500-DYA

1,020.00 €

03-690

Not Available For Sale

14.0950-V

1.80 €

PU-8/6-CC-1

plastic hose; material polyurethane; multiplier for operating pressure 30°C = 0,83 / 60°C = 0,49; temperature range -40...60°C; outside diameter 8mm; inside diameter 6mm; operating pressure at 23°C 12bar; colour crystal clear

1.80 €

CP-8/6-GR-1

plastic hose; material co-polyurethane; multiplier for operating pressure 30°C = 0,87 / 80°C = 0,43; vacuum -0,87bar; temperature range -40...100°C; outside diameter 8mm; inside diameter 6mm; operating pressure at 23°C 16bar; colour grey

1.89 €

PA-9/7-NA-0100

plastic hose; material polyamide; multiplier for operating pressure 30°C = 0,87 / 80°C = 0,47; vacuum -0,87bar; temperature range -60...100°C; outside diameter 9mm; inside diameter 7mm; operating pressure at 20°C 16bar; colour natural

188.20 €

PKS1160B

1.90 €

PU-8/5,5-NA-0050

plastic hose; polyurethane; outside diameter 8mm; inside diameter 5,5mm; operating pressure at 23°C 15bar; colour natural

93.30 €

SE-38-CU-MA

manometer sealing; dimension 3/8"; material copper

1.90 €

PAV2-8/6-NA-1

plastic hose; material polyamide; multiplier for operating pressure 30°C = 0,70 / 40°C = 0,75 / 50°C = 0,65 / 60°C = 0,55; temperature range -20...80°C; outside diameter 8mm; inside diameter 6mm; operating pressure at 23°C 20bar; colour natural; self-extinguishing; Raw material UL94 V2 certified

2.00 €