STASTO Combination
fully assembled and tested; shrink-wrapped in plastic film
consists of:
ball valve with pneumatic actuator; female thread; body, ball AISI 316; seals PTFE/FKM; double acting actuator; control pressure 5,5...8bar; medium temperature -20...+160°C; free of oil and grease for oxygen; RP 1/2"; nominal diameter 15mm; operating pressure at 30°C 0...60bar; operating pressure at 100°C 0...40bar; operating pressure at 160°C 0...25bar; length 65mm; actuator PAD052

A1N2I3-5V-150-PM
knife gate valve with double acting actuator; wafer type; body AISI 316; gate AISI 316; soft sealed FKM; packing PTFE-synthetic/FKM; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature 0...+180°C; prepared for 2 mechanical switches MSU01A; DN 150mm; length 60mm; pressure range 0-8bar
ABS40
mounted pilot valve series ABS; suitable for pneumatically operated knife gate valves; 5/2-way solenoid valve; flow control valves; silencer; mounted at cylinder; type of coil CS; connector size 16mm; 5/2-Wege-Magnetventil (K52W1014); DN gate valve 50-400mm
CS02400
coil type CS; connector size 16mm; voltage 24VDC
6-14123-0000-S
connector; connector size 16mm; Standard; voltage 0-250VAC/DC
MSU01A
Elektrische Stellungsanzeige Serie MSU; passend für Plattenschieber; aufgebauter mechanischer Endschalter (1 Stück)
PI12-06-14-N-0
straight male stud fitting series PI12; nickel plated brass; cylindrical thread; diameter 6mm; thread 1/4"

A1N2H3-5V-150-B
knife gate valve with double acting actuator series A1N2H3-5V-B; wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed FKM; screws stainless steel; packing PTFE-synthetic/FKM; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature 0...+120°C; DN 150mm; length 60mm; pressure range 0…8bar
ABS40
mounted pilot valve series ABS; suitable for pneumatically operated knife gate valves; 5/2-way solenoid valve; flow control valves; silencer; mounted at cylinder; type of coil CS; connector size 16mm; 5/2-Wege-Magnetventil (K52W1014); DN gate valve 50-400mm
CS02400
coil type CS; connector size 16mm; voltage 24VDC
6-14123-0000-S
connector; connector size 16mm; Standard; voltage 0-250VAC/DC
PI12-06-14-N-0
straight male stud fitting series PI12; nickel plated brass; cylindrical thread; diameter 6mm; thread 1/4"

BA036-34-S0
<<Kugelhahn mit Druckluftdrehantrieb>> <<Serie>> BA036-S0; <<für Dampf>>; <<Innengewinde>>; <<Gehäuse>>, <<Kugel>> <<1.4401>>; <<Dichtungen>> <<PTFE-verstärkt>>/FKM; <<einfachwirkender Antrieb>>; <<Steuerdruck>> 5,5...8bar; <<Druckbereich>> <<Dampf>> 0...15bar; <<Mediumstemperatur>> -20...+198°C; RP 3/4"; <<Nennweite>> 20mm; <<Einbaulänge>> 76mm; <<Antrieb>> PAS0635
ABS53
<<Aufgebautes Steuerventil>> <<Serie>> ABS; NAMUR; <<Schalldämpfer>>; <<Standardspule>> C001; <<Steckerbreite>> 22mm; <<3/2-Wege>>-NAMUR-<<Magnetventil>> (NM32W1S-PR); <<Antrieb>> PAS052-270
C001-03
<<Magnetspule>> <<Typ>> C001; <<Steckerbreite>> 22mm; <<Spannung>> 24VDC / 48V/50-60Hz
C002-31-LV-2
<<Gerätesteckdose>>; <<Steckerbreite>> 22mm; <<mit eingebauter LED-gelb und VDR>>; <<Spannung>> 24VAC/DC
EB0X01-WSTHVB
EB0X01-WSTHVB

BUW6-150-DSV-D22
butterfly valve with pneumatic actuator; wafer type; length according to EN558−1 R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner FKM; nominal flange pressure PN10/16/ANSI150; double acting actuator; control pressure 5,5...8bar; medium temperature -10...+200°C; pressure range 0...10bar; DN 150mm; length 56mm; actuator PAD115
ABS54
mounted pilot valve series ABS; speed control; suitable for pneumatically operated butterfly valve; standard coil C001; connector size 22mm; 5/2-way solenoid valve - NAMUR type (NM52W1S-PR); actuator PAD/PAS052-270
C001-03
coil type C001; connector size 22mm; voltage 24VDC / 48V/50-60Hz
C002-31-LV-2
connector; connector size 22mm; with integrated LED-yellow and VDR; voltage 24VAC/DC
EB0X01-WSTHVB
EB0X01-WSTHVB

STASTO Combination
fully assembled and tested
butterfly valve with pneumatic actuator; wafer type; length according to EN558−1 R20; body steel epoxy coated; disc AISI 316, shaft AISI 630; seat Inconel 625; nominal flange pressure PN10/16/25/ANSI150; double acting actuator; control pressure 5,5...8bar; medium temperature -10...+450°C; pressure range 0...10bar; DN 150mm; length 56mm; actuator PAD125-HB; actuator mounted 90° twisted; mounted pilot valve; speed control; 5/2-way solenoid valve - NAMUR type (NM52W1S-PR-HT), high temperature design to +80°C; 24VDC-LED

STASTO combination
fully assembled and tested
butterfly valve with pneumatic actuator; wafer type; length according to EN558−1 R20; body steel epoxy coated; disc AISI 316, shaft AISI 630; seat Inconel 625; nominal flange pressure PN10/16/25/ANSI150; double acting actuator; control pressure 5,5...8bar; medium temperature -10...+450°C; pressure range 0...10bar; DN 200mm; length 61mm; actuator PAD140-HB; actuator mounted 90° twisted; mounted pilot valve; speed control; 5/2-way solenoid valve - NAMUR type (NM52W1S-PR-HT), high temperature design to +80°C; 24VDC-LED

A1N2I3-5V-100
knife gate valve with double acting actuator; wafer type; body AISI 316; gate AISI 316; soft sealed FKM; packing PTFE-synthetic/FKM; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature 0...+180°C; DN 100mm; length 50mm; pressure range 0-10bar
ABS40
mounted pilot valve series ABS; suitable for pneumatically operated knife gate valves; 5/2-way solenoid valve; flow control valves; silencer; mounted at cylinder; type of coil CS; connector size 16mm; 5/2-Wege-Magnetventil (K52W1014); DN gate valve 50-400mm
CS02400
coil type CS; connector size 16mm; voltage 24VDC
6-14123-0000-S
connector; connector size 16mm; Standard; voltage 0-250VAC/DC
PI12-06-14-N-0
straight male stud fitting series PI12; nickel plated brass; cylindrical thread; diameter 6mm; thread 1/4"

A1N2H3-5V-100-B
knife gate valve with double acting actuator series A1N2H3-5V-B; wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed FKM; screws stainless steel; packing PTFE-synthetic/FKM; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature 0...+120°C; DN 100mm; length 50mm; pressure range 0…10bar
ABS40
mounted pilot valve series ABS; suitable for pneumatically operated knife gate valves; 5/2-way solenoid valve; flow control valves; silencer; mounted at cylinder; type of coil CS; connector size 16mm; 5/2-Wege-Magnetventil (K52W1014); DN gate valve 50-400mm
CS02400
coil type CS; connector size 16mm; voltage 24VDC
6-14123-0000-S
connector; connector size 16mm; Standard; voltage 0-250VAC/DC
PI12-06-14-N-0
straight male stud fitting series PI12; nickel plated brass; cylindrical thread; diameter 6mm; thread 1/4"

relief valve RV13-14W-6-200-V-3G0; body AISI 316Ti; cap AISI 316Ti; seal FKM; gas-proof cover; incl. TÜV acceptance test certificate EN-10204-3.2; set pressure 200bar; inlet male G 1/4"; DN 6mm; outlet female G 3/8"; free of oil and grease for oxygen; shrink-wrapped in plastic film

STASTO Combination consists of:#br# - 1,00 ST BADA-025-SSTV-D0#br#flanged ball valve DN25; PN16 with pneumatic actuator; PAD052; double acting; ball valve AISI 316#br# - 1,00 ST EB0X03#br#mounted limit switch box#br# - 1,00 ST ABS51; 24VDC #br#mounted solenoid valve NM52W1S-PR; actuation: electrical/internal control air

close @#br#the following parts has been replaced:#br#@

STASTO combination
fully assembled and tested
consists of:
1 x 3830-1/4"", ball valve made of brass; mini type; seals PTFE/NBR; medium temperature -20...+90°C; turning handle polyamide; pressure range 0...10bar; nominal diameter 8mm; incl. male hose nozzle; polyamide; diameter 8mm

STASTO combination
fully assembled and tested
consists of:
1 x 3830-1/4"; ball valve made of brass; mini type; seals PTFE/NBR; medium temperature -20...+90°C; turning handle polyamide; pressure range 0...10bar;
1 x C0C72-M14-B; coupling; DN 7,2mm;
1 x C0P72-M14-B-C; coupling plug; DN 7,2mm

STASTO combination
ball valve made of brass; connections 6/4mm respectively M14x1,5

STASTO combination
fully assembled and tested:
- 1 x 3831-1/2"; ball valve made of brass; female/male thread; seals PTFE/NBR; G1/2"; nominal diameter 10mm; length 46mm
- 1 x TH59-12-12N-N; female to male reducer adapter; adapter; nickel plated brass; male thread G1/2"; female thread 1/2 NPT;

STASTO combination
fully assembled and tested
consists of:
1 x S-23D-SN; blow gun
1 x C0P72-M14-H; coupling plug; male thread

STASTO combination
fully assembled and tested
consists of:
FR01-14-0,5/8; filter regulator; relieving; pressure range 0,5...8bar; incl. mounting bracket; inlet push-in fitting 6mm with ball valve; outlet push-in fitting 6mm

STASTO combination
fully assembled and tested
consists of:
pressure regulator; body brass; fine screen stainless steel; spring cover, polyamide; seals NBR/EPDM; mesh size 0,4mm; max. inlet pressure 16bar; operating pressure range 1,5...6bar; medium temperature -10…+70°C; incl. bourdon tube manometer; body sheet steel; measuring unit, motion work copper based alloy; front glass acryl; ambient temperature -20...+60°C; medium temperature max. +60°C; connection below; class 1,6; diameter 40mm; indicating range 0-10/0-145; unit bar/psi and
screw fitting

STASTO combination
consists of:
pressure regulator; body brass; fine screen stainless steel; spring cover, polyamide; seals NBR/EPDM; mesh size 0,4mm; max. inlet pressure 16bar; operating pressure range 1,5...6bar; medium temperature -10…+70°C; incl. bourdon tube manometer; body sheet steel; measuring unit, motion work copper based alloy; front glass acryl; ambient temperature -20...+60°C; medium temperature max. +60°C; connection below; class 1,6; diameter 40mm; indicating range 0-10/0-145; unit bar/psi;
screw fitting and hose nozzle 6mm

STASTO combination
fully assembled and tested
3/2-way solenoid valve; directly operated; actuation electrical/spring; NC; G 1/8"; DN 1,2mm; pressure 0-10bar; 24VDC with integrated LED-yellow, VDR and PVC-cable (2 m); incl. bidirectional flow control valve and screw fittings 8mm; 6mm

STASTO combination
fully assembled and tested
consists of:
lubricator; L-12-PE; connection 1/2"
ball valve made of brass; BAW1-004-BLTT-MZL; RP 1/2"
with drain hole; with locking device
2x male hose nozzle; TH38-13-12-B-C
diameter 13mm

STASTO combination
fully assembled and tested
consists of:
- 1x 2/2-way solenoid valve 21WA4K0B130; pilot-operated; NC; body brass; tube stainless steel one-piece; seal NBR; medium temperature -10...+90°C; G 1/2"; DN 13mm; pressure AC 0,2-16bar; incl. coil and connector; voltage 220-230V/50-60Hz
- 1x T-adapter; connection male thread 1/2"
- pressure inlet above Y-adapter; connections: male stud branch tee swivel; diameter 6mm, female thread 1/4"
- outlet: male thread 1/4" NPT

STASTO combination
2/2-way solenoid valve; combined operated; NC; body brass; tube stainless steel one-piece; seal NBR; medium temperature -10...+90; G 1"; DN 25mm; length 104mm; GDV-24VDC-14W with integrated LED-yellow, VDR and PVC-cable (3 m)

STASTO AutomationPackage
completely picked and checked
consists of:
1 x S-23D-SN; blow gun
1 x C0P72-M14-H; coupling plug male thread
1 x C0C72-F14-H; coupling; female thread 1/4" 30m PA-8/6-BK; plastic hose
1 x C0P72-F14-H; coupling plug; female thread 1/4"
2 x SC12C-08-14-Z; straight male stud fitting

STASTO combination
fully assembled and tested:
- 4 x CS-PS125; 3/2-way valve; NC; standard coil C001
- 4 x C001-03; coil; 24VDC
- 4 x C002-31-6; connector; voltage 0-250VAC/DC
- 4 x PI16-06-18-N-0-360; swivel male elbow; diameter 6mm; thread 1/8"
- 1 x PI12-06-18-N-0; straight male stud fitting; diameter 6mm; thread 1/8"
- 4 x SLS-MM5-BS; silencer
thread 1/8"

inlet 1x6mm, outlet 4x6mm

STASTO combination
fully assembled and tested
consists of:
distributor KPV52266-6E;
filter regulator FR38-20-08-R-PE-SS;
push-in fittings 6mm

STASTO combination
fully assembled and tested
consists of:
1x manual shut-off valve V3-34;
1x filter regulator FR34-20-08-R-PE-SS;
2x distributor K-BUI-G