Other materiales - A02 | STASTO Automation International

ATEX zone 1; Female thread; Body Zinc plated steel; Ball Steel; Seals PEEK/NBR With erosion protection ring; Medium temperature -20...+100°C; For liquids

High pressure ball valve Series BA301-L-A

Full bore; Female/male thread; Seal PTFE; Medium temperature -20...+160°C; Turning handle Aluminum

Ball valve made of brass Series BA862-F-TH

Full bore; Female thread; Seal PTFE; Medium temperature -20...+160°C; Hand lever Steel

Ball valve made of brass Series BA862-L

Mini type;Female/male thread; Seals PTFE/NBR; Medium temperature -20...+80°C; Turning handle Polyamide; Pressure range 0...10bar

Ball valve made of brass Series BA928

With drain hole; Female thread; Seal PTFE; Medium temperature -10...+100°C; Hand lever Steel; Pressure range 0...14bar; With locking device

Ball valve made of brass Series BAW1

Other materiales - A02

Female thread; Body, Ball 1.4571; Seals PEEK/FKM; For liquids; Medium temperature -20...+100°C

High pressure ball valve Series RKH

Female thread; Body Zinc plated steel; Ball Steel; Seals POM/NBR; Medium temperature -10...+100°C

High pressure ball valve Series BKH...G

Male thread According to ISO 8434-1 (DIN 2353); Body Zinc plated steel; Ball Steel; Seals POM/NBR; Medium temperature -10...+100°C

High pressure ball valve Series BKH...R

3-way-type; Sealing on two sides; Pressure inlet just in front; Female thread; Body Zinc plated steel; Ball Steel; Seals POM/NBR; Medium temperature -10...+100°C

High pressure ball valve Series BK3...G...L, BK3...G...T

3-way-type; Sealing on two sides; Pressure inlet just in front; Male thread According to ISO 8434-1 (DIN 2353); Body Zinc plated steel; Ball Steel; Seals POM/NBR; Medium temperature -10...+100°C

High pressure ball valve Series BK3...R...L, BK3...R...T

Female thread; Body, Ball 1.4571; Seals PEEK/FKM; For neutral gases; Medium temperature -20...+100°C

High pressure ball valve Series RKH...G

Flange PN16, Full bore; Body, Ball 1.4401; Seals PTFE/FKM; Pressure range 0...16bar; Medium temperature -20...+160°C; ATEX-Antistatic

Flanged ball valve Series 720178

Flange PN16, Full bore; Body Steel; Ball 1.4301; Seals Seals fibre-glass-reinforced PTFE/FKM; Pressure range 0...16bar; Medium temperature -10...+160°C

Flanged ball valve Series BA164-L

Full bore; Two-parts type; Female thread; Body Steel; Ball 1.4301; Seals PTFE Fibre-glass-reinforced/FKM; Medium temperature -20...+160°C; 800lbs

Ball valve made of steel Series BA122

Full bore; Two-parts type; Female thread; Body, Ball 1.4408; Seals PTFE; Medium temperature -20...+180°C; Pressure range 0-130bar;

Ball valve made of stainless steel Series BA174

For steam; ATEX II 2 G/D; Fire-safe; TA-Luft; Flange PN16, Full bore; Body Steel; Ball 1.4301; Seals PTFE-Graphite/FKM; Pressure range Steam 0...15bar; Medium temperature -20...+198°C

Flanged ball valve Series BA079-L-A

Full bore; Three-parts type; Female thread; Body, Ball 1.4408; Seals PTFE; Medium temperature -30...+180°C; Pressure range 0-200bar;

Ball valve made of stainless steel Series BA176

ATEX II 2 G/D; Full bore; Three-parts type; Butt weld ends; Body, Ball 1.4401; Seals PTFE-reinforced/FFKM; Medium temperature -20...+160°C; Fire-safe/ATEX-Antistatic design

Ball valve made of stainless steel Series BA175-L

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to ANSI B16.10; Flange ANSI150; Full bore; Body, Ball 1.4408; Seals PTFE/Graphoil/FKM; Pressure range 0...20bar; Medium temperature -20...+160°C

Flanged ball valve Series BA178-L-A

Full bore; Two-parts type; Female thread; Body 1.4408, Ball 1.4401; Ball seal made of 15% fibre-glass-reinforced PTFE; Medium temperature -20...+180°C; Lockable version

Ball valve made of stainless steel Series BA184

Material, Polypropylen; Seals PTFE/FKM

Flanged ball valve Series BA601

Material, Polypropylen; Seals PTFE/EPDM

Flanged ball valve Series BA605

Female/male thread; Seals PTFE/NBR; Medium temperature -20...+120°C; Turning handle Aluminum Red

Ball valve made of brass Series BA186

Female/male thread; Seals PTFE/NBR; Medium temperature -20...+120°C; Turning handle Aluminum Blue

Ball valve made of brass Series BA187

Flange PN16, Full bore; Body Steel; Ball 1.4301; Seals PTFE/FKM; Pressure range 0...16bar; Medium temperature -10...+160°C; ATEX-design

Flanged ball valve Series BA154

For steam; Full bore; Three-parts type; Female thread; Body Steel; Ball 1.4301; Seals PTFE-reinforced/FKM; Pressure range Steam 0...15bar; Medium temperature -10...+198°C

Ball valve made of steel Series BA145

For steam; ATEX II 2 G/D; Full bore; Three-parts type; Female thread; Body Steel; Ball 1.4301; Seals PTFE-reinforced/FKM; Pressure range Steam 0...15bar; Medium temperature -10...+198°C

Ball valve Series BA145-L-A

ATEX II 2 G/D; Full bore; Three-parts type; Female thread; Body Steel; Ball 1.4301; Seals PTFE/FKM; Medium temperature -10...+160°C

Ball valve made of steel Series BA190

Full bore; Two-parts type; Female thread; Body Steel; Ball 1.4301; Seals PTFE/FKM; Pressure range 0...64bar; Medium temperature -20...+160°C

Ball valve made of steel Series BA088

Full bore; Two-parts type; Female thread; Body Steel; Ball 1.4301; Seals PTFE/FKM; Pressure range 0...64bar; Medium temperature -10...+160°C; Fire-Safe/Antistatik According to ATEX

Ball valve made of steel Series BA191

Full bore; Female thread; Body Steel; Ball 1.4401; Seals PTFE Fibre-glass-reinforced/FKM; Medium temperature -20...+160°C; 800lbs

Ball valve made of steel Series BA122

Female thread; Body, Ball 1.4571; Seals POM/NBR; For hydraulic liquids; Medium temperature -20...+100°C

High pressure ball valve Series BA536

Male thread According to ISO 8434-1 (DIN 2353); Body, Ball 1.4571; Seals PEEK/FKM; For liquids; Medium temperature -20...+100°C

High pressure ball valve Series BA066-L/S-L

Mini type; Female/male thread; Seals PTFE/FKM; Medium temperature -20...+150°C; Turning handle Polyamide; Pressure range 0...10bar

Ball valve made of brass Series BA195

Flange PN63; Length According to EN558−1 F1; Full bore; Body; Ball 1.4571; Seals PVDF/EPDM; Pressure range 0...63bar;Medium temperature -20...+60°C

Flanged ball valve Series BA563

Flange PN63; Length According to EN558−1 F1; Full bore; Body; Ball 1.4571; Seals Metallic/EPDM; Pressure range 0...63bar;Medium temperature -20...+60°C

Flanged ball valve Series BA564

Flange PN63; Length According to EN558−1 F1; Full bore; Body Steel; Ball Stainless steel; Seals PVDF/EPDM; Pressure range 0...63bar;Medium temperature -20...+60°C

Flanged ball valve Series BA565

Flange PN63; Length According to EN558−1 F1; Full bore; Body Steel; Ball Stainless steel; Seals Metallic/EPDM; Pressure range 0...63bar;Medium temperature -20...+60°C

Flanged ball valve Series BA566

ATEX II 2 G/D; Flange PN16, Full bore; Body, Ball 1.4301; Seals PTFE; Pressure range 0...16bar; Medium temperature -20...+160°C

Flanged ball valve Series BA160-L

Full bore; Two-parts type; Female/male thread; Body 1.4408; Ball 1.4401; Seals PTFE; Medium temperature -30...+180°C; With locking device

Ball valve made of stainless steel Series BA113-L

Full bore; Female thread; Body, Ball 1.4404; Seals PTFE/EPDM-Special; Medium temperature -45...+150°C

Ball valve made of stainless steel Series BA192-L

Ball valve Series BA131-L

Seal kit PTFE/EPDM

Flanged ball valve Series BA089-L; Flange ANSI 300; Fire-Safe/Antistatik According to ATEX/TA-Luft; Length According to ANSI B16.10; Body Steel; Ball 1.4301; Seals fibre-glass-reinforced PTFE/FKM; Medium temperature -10...+160°C

Flanged ball valve Series BA089-LLD-A

ATEX II 2 G/D; Fire-safe; TA-Luft; Flange PN40; Length According to EN558−1R27; Full bore; Body Zinc plated steel; Ball 1.4301; Seals PTFE/Graphoil/FKM; Medium temperature -10...+160°C; With locking device

Flanged ball valve Series BA115-LLD-A

Flange ANSI 150; API608; Fire-Safe/Antistatik According to ATEX/TA-Luft; Length According to ASME B16.10; Body Steel; Ball 1.4301; Seals PTFE/FKM; Medium temperature -20...+180°CPressure range 0...20Bar;

Flanged ball valve Series BA197-L-A

ATEX II 2 G/D; TA-Luft; DVGW-gas-approved; Length According to EN558−1R27; Body Steel; Ball 1.4301; Seals Fibre-glass-reinforced PTFE/HNBR; Flange PN40; Full bore; Medium temperature 0...+50°C

Flanged ball valve Series BA151

Full bore; Three-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA033-N

Full bore; Three-parts type; Female thread; Body Steel; Ball 1.4301; Seals PTFE/FKM; Medium temperature -10...+160°C

Ball valve made of steel Series BA028-N

ATEX II 2 G/D; Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA081

Full bore; Female thread; Seals PTFE/NBR/FKM; Medium temperature -20...+160°C; Turning handle Aluminum

Ball valve made of brass Series BA198

Full bore; Female/male thread; Seal PTFE/NBR/FKM; Medium temperature -20...+130°C; Turning handle Aluminum

Ball valve made of brass Series BA199

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to EN558−1R101; Flange PN100, Full bore; Body And Ball Stainless steel AISI 316; Seals PTFE-metal reinforced/Graphoil/FKM; Pressure range 0...100bar; Medium temperature -20...+160°C

Flanged ball valve Series BA162

ATEX II 2 G/D; 3-way-type; Sealing on two sides; Pressure inlet just in front; Reduced bore; Flange PN16; Body Steel; Ball 1.4301; Seals PTFE/FKM; Pressure range 0...16bar; Medium temperature -10...+160°C

Flanged ball valve Series BA046-A, BA047-A

Full bore; Female thread; Seal PTFE; Medium temperature -15...+90°C; Hand lever Aluminum

Ball valve made of brass Series BA200

Full bore; Female/male thread; Seal PTFE; Medium temperature -20...+160°C; Hand lever Aluminum

Ball valve made of brass Series BA203

Female thread; Body Brass; Disc PEI (Ultem 1000); Pressure range 0...16Bar; Medium temperature -10...+130°C; Locking hand lever Steel

Butterfly valve with hand lever Series BU900

Fire-Safe/Antistatik According to ATEX/TA-Luft; 3-way-type; Ball L; Sealing on two sides; Pressure inlet just in front; Reduced bore; Flange PN16; Body Steel; Ball 1.4301; Seals PTFE/FKM; Pressure range 0...16bar; Medium temperature -10...+160°C

Flanged ball valve Series BA209

Fire-Safe/Antistatik According to ATEX/TA-Luft; Full bore; Three-parts type; Butt weld ends; Body Steel; Ball 1.4301; Seals PTFE/FKM;Medium temperature -10...+160°C

Ball valve made of steel Series BA208

Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/FKM; Free of oil and grease; For oxygen

Ball valve made of stainless steel Series BA210

Male thread According to ISO 8434-1 (DIN 2353); Body Zinc plated steel; Ball Hard chrome plated steel; Seals POM/NBR; Medium temperature -10...+90°C

High pressure ball valve Series BA654

ATEX II 2 G/D; Fire-safe; TA-Luft; Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE-Graphite reinforced/PTFE/FKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA117-L

With Heating jacket; Flange PN16, Full bore; Body, Ball 1.4401; Seals PTFE/FKM; Pressure range 0...16bar; Medium temperature -20...+160°C

Flanged ball valve Series BA128

; Flange PN16, Body, Ball Stainless steel 1.4571; Seals PEEK/FFKM; Pressure range 0...10bar; Medium temperature -20...+260°C

Flanged ball valve

; Flange PN40, Full bore; Body Steel; Ball 1.4301; Seals PTFE-reinforced/FKM; Pressure range 0...40bar; Medium temperature -10...+160°C; Fire safe/Antistatic

Flanged ball valve

; Flange PN40; Full bore; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Pressure range 0...40bar; Medium temperature -20...+160°C; Fire safe/Antistatic

Flanged ball valve

With exhaust; Push-in fitting; Material Plastic; Seal NBR; Medium temperature 0...+60°C; Pressure range -0,95...10Bar

Ball valve Series BA644

Flange PN40; Full bore; Body, Ball 1.4401; Seals PTFE-reinforced/EPDM; Pressure range 0...40bar; Medium temperature -35...+150°C

Flanged ball valve Series BA575

Full bore; Two-parts type; Female thread; Body 1.4408, Ball 1.4401; Ball seal made of 15% fibre-glass-reinforced PTFE; Medium temperature -20...+180°C; Lockable version; Incl. inspection certificate 3.1 For pressure, function and tightness

Ball valve made of stainless steel Series BA184

ATEX II 2 G/D; Fire-safe; TA-Luft; Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE-Graphite reinforced/PTFE/FKM; Medium temperature -20...+160°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Ball valve made of stainless steel Series BA117-L-3C

Mounting bracket Series MKS

Mounted

Mounting bracket Series MKS

Hand lever With Locking device

Flange PN40; Full bore; Body, Ball 1.4401; Seals PTFE-Graphite reinforced/EPDM; Pressure range 0...40bar; Medium temperature -40...+160°C

Flanged ball valve Series BA219

Full bore; Three-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/FKM; Free of oil and grease for oxygen

Ball valve made of stainless steel Series BA138

Full bore; Three-parts type; Butt weld ends; Body, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C; Free of oil and grease for oxygen

Ball valve made of stainless steel Series BA226

Flange PN40; Full bore; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Pressure range 0...40bar; Medium temperature -20...+160°C; Fire-Safe/Antistatik According to ATEX/TA-Luft

Flanged ball valve Series BA212

Female thread; Body, Ball 1.4571; Seals POM/NBR; For hydraulic liquids; Medium temperature -20...+100°C; Drilled for mounting an actuator

High pressure ball valve Series BA536-B

Female thread; Body Zinc plated steel; Ball And Stem Stainless steel; Seals POM/NBR; Medium temperature -10...+100°C

High pressure ball valve Series BKH...G

Female thread; Body 1.4571; Ball 1.4571 Hard chrome plated; Seals POM/NBR; Medium temperature -30...+100°C; With erosion protection ring

High pressure ball valve Series BA670

Male thread According to ISO 8434-1 (DIN 2353); Body 1.4571; Ball 1.4571 Hard chrome plated; Seals POM/NBR; Medium temperature -30...+100°C; Incl. Abrasion protection

High pressure ball valve Series BA670

For steam; Full bore; Three-parts type; Butt weld ends; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Pressure range Steam 0...15bar; Medium temperature -20...+198°C

Ball valve made of stainless steel Series BA091

Full bore; Female thread; Seal PTFE; Medium temperature -20...+160°C; Turning handle Aluminum; Incl. Compensation hole-/Flushing hole

Ball valve made of brass Series BA217

Full bore; Two-parts type; Female thread; Body Steel; Ball 1.4301; Seals fibre-glass-reinforced PTFE/FKM; Medium temperature -10...+160°C, Class 800lbs

Ball valve made of steel Series BA104

Fire-Safe/Antistatik According to ATEX/TA-Luft; Length According to ANSI B16.10; Body Zinc plated steel; Ball 1.4301; Seals PTFE/FKM; Medium temperature -10...+160°C; Flange ANSI150; Pressure range 0...20Bar

Flanged ball valve Series BA092

Flange PN40; Full bore; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Free of oil and grease for oxygen

Flanged ball valve Series BA129

With drain hole; Female thread; Seal PTFE; Medium temperature -20...+160°C; Hand lever Stainless steel; Pressure range 0...10bar; With locking device

Ball valve made of stainless steel Series BA671

Flange PN16, Full bore; Body, Ball 1.4401; Seals PTFE/EPDM; Pressure range 0...16bar; Medium temperature -20...+160°C

Flanged ball valve Series BA131

ATEX II 2 G/D T4; 3-way-type; Female thread; Full bore; Body 1.4404 Polished; Ball 1.4404; Seals MPTFE/FKM; Sealing on three ports; Medium temperature -20...+170°C

Ball valve made of stainless steel Series BA552-A, BA576-A

ATEX II 2 G/D; 3-way-type; Sealing on three ports; Full bore; Body 1.4404 Polished; Ball 1.4404; Seals PTFE/FKM; Medium temperature -20...+160°C; ATEX-Antistatic design

Flanged ball valve Series BA055-L-ATEX, BA056-L-ATEX

Female thread; Body, Ball 1.4571/1.4404; Seals POM/NBR; For hydraulic liquids; Medium temperature -30...+100°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

High pressure ball valve Series BA234-L-3C

Female thread; With locking device; Body, Ball 1.4571/1.4404; Seals POM/NBR; For hydraulic liquids; Medium temperature -30...+100°C

High pressure ball valve Series BA234-LLD

Male thread According to ISO 8434-1 (DIN 2353); Body, Ball 1.4571/1.4404; Seals POM/NBR; For hydraulic liquids; Medium temperature -30...+100°C

High pressure ball valve Series BA234-L/S-L

Male thread According to ISO 8434-1 (DIN 2353); With locking device; Body, Ball 1.4571/1.4404; Seals POM/NBR; For hydraulic liquids; Medium temperature -30...+100°C

High pressure ball valve Series BA234-L/S-LLD

Fire-Safe/Antistatik According to ATEX/TA-Luft; Full bore; Three-parts type; Female thread; Body, Ball 1.4401; Seals PTFE-Fibre-glass-reinforced/EPDM; Compensation hole; Medium temperature -30...+160°C

Ball valve made of stainless steel Series BA673

Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C; With locking device

Ball valve made of stainless steel Series BA069-LD

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to EN558−1R101; Flange PN100, Full bore; Body steel A350-LF2, Ball 1.4301; Seals PTFE-metal reinforced/Graphoil/FKM; Pressure range 0...100bar; Medium temperature -20...+160°C

Flanged ball valve Series BA179

ATEX II 2 G/D; Fire-safe/ATEX-Antistatic design; Full bore; Three-parts type; Butt weld ends; Body, Ball 1.4408; Seals PTFE-reinforced/Graphite/FKM; Silicone-free; Medium temperature -30...+180°C

Ball valve made of stainless steel Series BA133-L-A

Flange PN16, Full bore; Body Steel; Ball 1.4301; Seals PTFE/FKM; Pressure range 0...16bar; Medium temperature -20...+160°C; Incl. Inspection certificate EN-10204-3.1 For material, pressure, function and tightness

Flanged ball valve Series BA043-L-3C

Female thread; Body Zinc plated steel; Ball Steel; Seals POM/NBR; Medium temperature -20...+100°C

High pressure ball valve Series BA230-L

Male thread According to ISO 8434-1 (DIN 2353); Body Zinc plated steel; Ball Steel; Seals POM/NBR; Medium temperature -20...+100°C

High pressure ball valve Series BA230-L/S-L

ATEX II 2 G/D; Flange PN16, Full bore; Body Steel; Ball 1.4301; Seals PTFE/FKM; Pressure range 0...16bar; Medium temperature -20...+160°C

Flanged ball valve Series BA043-L-A

Flange PN16, Full bore; Body, Ball 1.4401; Seals PTFE/FKM; Pressure range 0...16bar; Medium temperature -20...+160°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Flanged ball valve Series BA049

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to ANSI B16.10; Body Zinc plated steel; Ball 1.4301; Seals PTFE/FKM; Medium temperature -10...+160°C; Flange ANSI150; Pressure range 0...20Bar

Flanged ball valve Series BA092

; For steam; Full bore; Three-parts type; Butt weld ends; Body Steel; Ball 1.4301; Seals PTFE-reinforced/FKM; Pressure range Steam 0...15bar; Medium temperature -10...+198°C

Ball valve made of steel Series BA078-L

For steam; ATEX II 2 D/G; Full bore; Three-parts type; Butt weld ends; Body Steel; Ball 1.4301; Seals PTFE-reinforced/FKM; Pressure range Steam 0...15bar; Medium temperature -10...+198°C

Ball valve made of steel Series BA078-L-A

For steam; ATEX II 2 G/D; Full bore; Three-parts type; Butt weld ends; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Pressure range Steam 0...15bar; Medium temperature -20...+198°C

Ball valve made of stainless steel Series BA091-L-A

Full bore; Female thread; Seal PTFE/FKM; Medium temperature -20...+170°C; Hand lever Steel; With spring return

Ball valve made of brass Series BA111-L

Female thread; Body, Ball 1.4571/1.4404; Seals PEEK/FKM; Medium temperature -20...+200°C

High pressure ball valve Series BA243-L

Female thread; Body, Ball 1.4408; Seals POM/FKM; With erosion protection ring; For gases; Medium temperature -20...+100°C

High pressure ball valve Series BA668-L

Female thread; Drilled for mounting an actuator; Body, Ball 1.4571/1.4404; Seals POM/FKM; For liquids; Medium temperature -20...+100°C

High pressure ball valve Series BA102-B

Female thread; Drilled for mounting an actuator; Body, Ball 1.4408; Seals POM/FKM; With erosion protection ring; For gases; Medium temperature -20...+100°C

High pressure ball valve Series BA668-B

Integrated strainer; Mesh size 0,5mm; Reduced bore; Female thread; Seals PTFE/FKM/NBR; Medium temperature -20...+100°C; Hand lever Steel

Ball valve made of brass Series BA560

Material Stainless steel; Suitable for Ball valve made of brass Series BA560

Spare-screen

ATEX II 2 G/D; TA-Luft; 3-way-type; Sealing on three ports; Full bore; Flange PN16; Body Steel; Ball 1.4401; Seals PTFE/FKM; Pressure range 0...16bar; Medium temperature -10...+160°C

Flanged ball valve Series BA064, BA065

Fire-Safe/Antistatik According to ATEX/TA-Luft; Full bore; Three-parts type; Female thread; Body, Ball 1.4401; Seals PTFE-Fibre-glass-reinforced/EPDM; Compensation hole; Medium temperature -30...+160°C

Ball valve made of stainless steel Series BA673

ATEX II 2 G/D; TA-Luft; 3-way-type; Sealing on three ports; Full bore; Flange PN16; Body Stainless steel, Ball 1.4401; Seals PTFE/FKM; Pressure range 0...16bar; Medium temperature -20...+160°C

Flanged ball valve Series BA062-L-A, BA063-L-A

Fire-Safe/Antistatik According to ATEX/TA-Luft; Full bore; Body 1.4408; Ball 1.4401; Seals PTFE / metal reinforced/FKM; Pressure range 0...100bar; Medium temperature -20...+160°C

Flanged ball valve ANSI 600 Series BA245

With Heating jacket; Flange PN16, Full bore; Body, Ball 1.4401; Seals PTFE/FKM; Pressure range 0...16bar; Medium temperature -20...+160°C

Flanged ball valve Series BA247

Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Ball valve made of stainless steel Series BA031

Full bore; Two-parts type; Female thread; Body, Ball 1.4404; Body Polished; Seals PTFE/FKM Without dead space; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA907

Full bore; Two-parts type; Female thread; Body, Ball 1.4404; Body Polished; Seals PTFE/FKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA168-L

Full bore; Two-parts type; Female thread; Body, Ball 1.4404; Body Polished; Seals PTFE/FKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA168-L-AH

; Full bore; Female thread; Seals PTFE/EPDM

Ball valve Series BA678

3-way-type; Sealing on three ports; Full bore; Body 1.4306 Polished; Ball 1.4306; Seals PTFE/FKM; Medium temperature -20...+160°C; Hand lever

Ball valve made of stainless steel Series BA169

ATEX II 2 G/D; TA-Luft; Full bore; Two-parts type; Female thread; Body 1.4401 Polished, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA032-A

ATEX II 2 G/D; TA-Luft; Full bore; Two-parts type; Female thread; Body 1.4401 Polished, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Ball valve made of stainless steel Series BA032-A3C

Flange ANSI 150 metric, Full bore; Body, Ball 1.4401; Seals PTFE/FKM; Pressure range 0...20bar; Medium temperature -20...+160°C

Flanged ball valve Series 720006

Full bore; Three-parts type; Butt weld ends; Body Steel; Ball 1.4301; Seals PTFE-reinforced/FKM; Medium temperature -10...+160°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Ball valve made of steel Series BA029

Push-in connection for hose on both sides; Material Plastic; Seal NBR; Medium temperature 0…+60°C; Pressure range 0…10bar

Ball valve

Flange PN16; Full bore; Body steel; Seals PTFE/FPM; Pressure range 0…16bar; Medium temperature -20...+60°C; Length EN558 R27; DVGW-gas-approved

Flanged ball valve

3-way-type; Sealing on two sides; Pressure inlet just in front; Female thread; Body; Ball 1.4571; Seals POM/NBR; Medium temperature -30...+100°C; With erosion protection ring; For gases

High pressure ball valve Series BA253

3-way-type; Sealing on three ports; Full bore; Thread DIN11851; Body 1.4404 Polished; Ball 1.4404; Seals PTFE/FKM; Medium temperature -20...+170°C; Hand lever

Ball valve made of stainless steel Series BA684

With drain hole; Female thread; Seals PTFE/NBR; Medium temperature -10...+100°C; Turning handle Aluminum; Pressure range 0...10bar

Ball valve made of brass Series BA170

Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Ball valve made of stainless steel Series BA069

Body, Ball 1.4404; Seals PTFE/EPDM-Special; Medium temperature -45...+150°C

Flanged ball valve Series BA550-L

Male thread according to ISO 8434-1 (DIN 2353); Body, Ball 1.4571/1.4404; Seals POM/FKM; Medium temperature -20...+100°C; For liquids

High pressure ball valve Series BA102-L/S-L

Female thread; Body Zinc plated steel; Ball Stainless steel; Seals PEEK/FKM

High pressure ball valve Series BA685

Female thread; Body Zinc plated steel; Ball Hard chrome plated steel; Seals POM/NBR; Medium temperature -10...+90°C

High pressure ball valve Series BA663

Full bore; Three-parts type; Butt weld ends; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Medium temperature -20...+160°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Ball valve made of stainless steel Series BA034-L-3C

Flange PN16, Full bore; Body Cast iron EN-GJL-250; Ball 1.4301; Seals PTFE/NBR; Pressure range 0...16bar; Medium temperature -10...+120°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Flanged ball valve Series BA040-L-3C

Mini type; Female thread; Seals PTFE/FKM; Medium temperature -20...+120°C; Turning handle Aluminum; Pressure range 0...63bar

Ball valve made of stainless steel Series BA585

Mini type; Female thread/Male thread; Seals PTFE/FKM; Medium temperature -20...+120°C; Turning handle Aluminum; Pressure range 0...63bar

Ball valve made of stainless steel Series BA553

For steam; TA-Luft; Full bore; Body, Ball 1.4408; Seals PTFE-reinforced/FKM; Pressure range Steam 0...15bar; Medium temperature -20...+198°C

Flanged ball valve Series BA586

3-way-type; Sealing on three ports; Solvent cement socket; Body, Ball PVC; Seals PTFE/EPDM; Pressure range 0...16bar; Medium temperature 0...+60°C

Ball valve SeriesBA680, BA681

For steam; Flange PN40; Full bore; Body, Ball 1.4401; Seals PTFE-Graphite/FKM; Pressure range 0...11bar; Medium temperature -20...+187°C

Flanged ball valve Series BA130-L

API608; ATEX II 2 G/D; Fire-Safe; TA-Luft; Length According to ASME B16.10; Full bore; Flange ANSI 150; Body, Ball 1.4408; Seals Reinforced PTFE/Graphite/FKM; Medium temperature -20...+180°C; Pressure range 0...20Bar

Flanged ball valve Series BA262

API608; ATEX II 2 G/D; Fire-Safe; TA-Luft; Length According to ASME B16.10; Full bore; Flange ANSI 150; Body, Ball 1.4408; Seals Reinforced PTFE/Graphite/FKM; Medium temperature -20...+180°C; Pressure range 0...20Bar; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Flanged ball valve Series BA262

Flange PN16, Full bore; Body, Ball 1.4301; Seals PTFE/FKM; Pressure range 0...16bar; Medium temperature -20...+160°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Flanged ball valve Series BA048-L-3C

TA-Luft certification; Length According to ANSI B16.10; Body Steel Painted RAL9007; Ball Stainless steel; Seals PTFE/FPM; Medium temperature -10...+90°C; Flange ANSI150; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness; Test conditions According to DIN 3230; Part 5; Test pressure Max. 40bar

Flanged ball valve Series BA238-L-3H

Female thread; Body, Ball 1.4571/1.4404; Seals POM/NBR; Medium temperature -30...+100°C; For liquids; Incl. inspection certificate 3.1 For pressure, function and tightness

High pressure ball valve Series BA234-L-3F

For steam; Full bore; Three-parts type; Female thread; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Medium temperature -20...+198°C; Pressure range 0...15bar; With locking device

Ball valve made of stainless steel Series BA036-LD

For steam; ATEX II 2 G/D; Fire-safe; TA-Luft; Flange PN16, Full bore; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Medium temperature -20...+198°C; Steam applications Max. 15bar; With locking device

Flanged ball valve Series BA050-L-ALD

For steam; ATEX II 2 G/D; Fire-safe; TA-Luft; Lockable version; Length According to EN558−1R27; Full bore; Body, Ball 1.4408; Ball seal PTFE-graphite reinforced; Stem seal Graphoil/FKM/PTFE; Pressure range Steam 0...15bar; Medium temperature -20...+198°C

Flanged ball valve Series BA110

With locking device; Full bore; Three-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA033-LD

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to EN558−1R27; Full bore; Body, Ball 1.4408; Seals PTFE/Graphoil/FKM; Medium temperature -20...+160°C; With locking device; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Flanged ball valve Series BA051-A3C

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to EN558−1R27; Full bore; Body, Ball 1.4408; Seals PTFE/Graphoil/FKM; Medium temperature -20...+160°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Flanged ball valve Series BA132-A3C

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to EN558−1R27; Full bore; Body Zinc plated steel; Ball 1.4301; Seals PTFE/Graphoil/FKM; Medium temperature -10...+160°C; With locking device; Incl. Inspection certificate EN-10204-3.1 For material, pressure, function and tightness

Flanged ball valve Series BA044-LLD-A3C

Full bore; Three-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Ball valve made of stainless steel Series BA033-3C

ATEX II 2 G/D; Flange PN16, Full bore; Body, Ball 1.4401; Seals PTFE/FKM; Pressure range 0...16bar; Medium temperature -20...+160°C

Flanged ball valve Series BA049-L-A

3-way-type; Sealing on two sides; Pressure inlet just in front; Male thread According to ISO 8434-1 (DIN 2353); Body, Ball Stainless steel 1.4571/1.4404; Seals POM/NBR; Medium temperature -30...+100°C; For liquids

High pressure ball valve Series BA696, BA697

Female thread; Body Zinc plated steel; Ball Steel; Seals POM/EPDM-Perox; Medium temperature -20...+100°C; For liquids

High pressure ball valve Series BA268

Ball valve made of stainless steel Series 700023 Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series 700023 Full bore

Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA031-N

ATEX II 2 G/D; Fire-safe; TA-Luft; Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE-Graphite reinforced/FKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA891-L-A

ATEX II 2 G/D; Fire-safe; TA-Luft; Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE-Graphite reinforced/FKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA069-L-A

Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA069-N-L

ATEX II 2 G/D; TA-Luft; Full bore; Three-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA033-A

Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA069-L

Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA031

Full bore; Two-parts type; Female thread; Body 1.4401 Polished, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA032-L

ATEX II 2 G/D; Full bore; Two-parts type; Female thread; Body Steel; Ball 1.4301; Seals PTFE Fibre-glass-reinforced/FKM; Medium temperature -20...+160°C; 800lbs

Ball valve made of steel Series BA122-N-L-A

ATEX II 2 G/D; Fire-safe; TA-Luft; Full bore; Two-parts type; Female thread; Body Steel; Ball Stainless steel AISI 316; Seals PTFE-Reinforced with carbographite; Class 800; Pressure range 0-138bar; Medium temperature -20...+160°C

Ball valve made of steel Series BA487-L-A

Flange PN40; Full bore; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Pressure range 0...40bar; Medium temperature -20...+160°C

Flanged ball valve Series BA052

ATEX II 2 G/D; TA-Luft; Flange PN40; Full bore; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Pressure range 0...40bar; Medium temperature -20...+160°C

Flanged ball valve Series BA052-A

Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C; Turning handle Stainless steel

Ball valve made of stainless steel Series BA069-TH

For steam; Full bore; Three-parts type; Female thread; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Pressure range Steam 0...14bar; Medium temperature -20...+198°C; Incl. Inspection certificate EN-10204-3.1 For material, pressure, function and tightness

Ball valve made of stainless steel Series BA036-L-3C

Full bore; Three-parts type; Female thread; Body Steel; Ball 1.4301; Seals PTFE/FKM; Medium temperature -10...+160°C; Incl. Inspection certificate EN-10204-3.1 For material, pressure, function and tightness

Ball valve made of steel Series BA028-L-3C

Flange ANSI150; Flange thread Metrical; Full bore; Body Steel; Ball 1.4301; Seals PTFE/FKM; Pressure range 0…20bar; Medium temperature -20...+160°C; Incl. Inspection certificate EN-10204-3.1 For material, pressure, function and tightness

Flanged ball valve Series BA074-L-3C

For steam; Full bore; Three-parts type; Female thread/Butt weld ends; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Medium temperature -20...+198°C

Ball valve made of stainless steel Series BA292

Full bore; Three-parts type; Female thread/Butt weld ends; Body, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA260

For steam; Full bore; Three-parts type; Female thread; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Pressure range Steam 0…14bar; Medium temperature -20...+198°C

Ball valve made of stainless steel Series BA036

Flange PN16, Full bore; Body Cast iron EN-GJL-250; Ball 1.4301; Seals PTFE/NBR; Pressure range 0...16bar; Medium temperature -10...+120°C

Flanged ball valve Series BA040-L-F

3-way-type; Sealing on three ports; Female thread; Seals PTFE/NBR; Medium temperature -20...+160°C; Hand lever Aluminum

Ball valve made of brass Series 3300, 3400

For steam; ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to EN558−1R27; Full bore; Body Steel A352-LCB; Ball 1.4301; Seals PTFE-Graphite reinforced/Graphoil/FKM; Pressure range Steam 0…15bar; Medium temperature -20...+198°C

Flanged ball valve Series BA149-L-A

Flange PN40; For steam; Full bore; Body, Ball 1.4401; Ball seal made of metallic-reinforced PTFE; Stem seal PTFE/FKM; Pressure range Steam 0...11bar; Medium temperature -20...+187°C

Flanged ball valve Series BA085-L

Flange ANSI1500; Length According to ANSI B16.10; Body Stainless steel AISI 316Ti/1.4404; Ball Stainless steel AISI 316/1.4408; Hand lever Stainless steel AISI 316L; Seals PEEK/FKM; Medium temperature -20...+250°C; Pressure range 0...250bar; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

Flanged ball valve Series BA299

API608; ATEX II 2 G/D; Fire-Safe; TA-Luft; Length According to ASME B16.10; Full bore; Flange ANSI 300; Body, Ball 1.4408; Seals Reinforced PTFE/Graphite/FKM; Medium temperature -20...+180°C; Pressure range 0...50Bar; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Flanged ball valve Series BA300-A3C

Flange PN40; Full bore; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Pressure range 0...40bar; Medium temperature -20...+160°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Flanged ball valve Series BA052-3C

Full bore; Two-parts type; Female thread; Body Steel; Ball 1.4301; Seals PTFE/FKM; Medium temperature -20...+160°C

Ball valve made of steel Series BA027

Full bore; Three-parts type; Female thread; Body Steel; Ball 1.4301; Seals PTFE/FKM; Medium temperature -10...+160°C

Ball valve made of steel Series BA028-L

Full bore; Three-parts type; Butt weld ends; Body Steel; Ball 1.4301; Seals PTFE-reinforced/FKM; Medium temperature -10...+160°C

Ball valve made of steel Series BA029

Full bore; Three-parts type; Socket weld ends; Body Steel; Ball 1.4301; Seals PTFE-reinforced/FKM; Medium temperature -10...+160°C

Ball valve made of steel Series BA030

Full bore; Three-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA033-L

Full bore; Three-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/EPDM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA280-L

3-way-type; Sealing on three ports, ATEX II 2 G/D; TA-Luft; Full bore; Flange PN16; Body Steel; Ball 1.4401; Seals PTFE-reinforced/FKM; Pressure range 0...16bar; Medium temperature -10...+160°C

Flanged ball valve Series BA310, BA311

Female thread; Drilled for mounting an actuator; Body, Ball 1.4571/1.4404; Seals PEEK(ATEX)/FKM; With erosion protection ring; For gases; Medium temperature -20...+100°C; Free of oil and grease; Incl. Inspection certificate EN-10204-3.1 For material, pressure, function and tightness; Incl. ATEX-certificate

High pressure ball valve Series BA686-B-A03G

ATEX II 2 G/D; TA-Luft; Full bore; Three-parts type; Butt weld ends; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA034-L-A

Full bore; Three-parts type; Butt weld ends; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA034-L

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to ANSI B16.10; Body Zinc plated steel; Ball 1.4301; Seals PTFE-Reinforced with carbographite/FKM;Medium temperature -10...+160°C; Flange ANSI150; Pressure range 0...20Bar; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Flanged ball valve Series BA314-A3C

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to ANSI B16.10; Body Zinc plated steel; Ball 1.4301; Seals R-PTFE-/FKM;Medium temperature -20...+180°C; Flange ANSI600; Pressure range 0...100Bar; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Flanged ball valve Series BA315-A3C

Full bore; Three-parts type; Socket weld ends; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA035-L

For steam; Full bore; Three-parts type; Female thread; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Pressure range Steam 0...14bar; Medium temperature -20...+198°C

Ball valve made of stainless steel Series BA036

For steam; Full bore; Three-parts type; Female thread; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Pressure range Steam 0...15bar; Medium temperature -20...+198°C; Compensation hole at the inlet

Ball valve made of stainless steel Series BA036

For steam; ATEX II 2 G/D; Full bore; Three-parts type; Female thread; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Pressure range Steam 0...14bar; Medium temperature -20...198°C

Ball valve made of stainless steel Series BA036

For steam; ATEX II 2 G/D; Full bore; Three-parts type; Female thread; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Pressure range Steam 0...15bar; Medium temperature -20...198°C

Ball valve made of stainless steel Series BA036

3-way-type; Female thread; Reduced bore; Body 1.4408; Ball 1.4401; Seals PTFE; Sealing on three ports; Medium temperature -20...+160°C;

Ball valve made of stainless steel Series BA037, BA038

Female thread; Drilled for mounting an actuator; Body, Ball 1.4571/1.4404; Seals POM/FKM; For liquids; Medium temperature -20...+100°C; Flange Bolt circle 36mm, Distance of the mounting holes 18x31,2mm

High pressure ball valve Series BA102-B

Flange PN16, Full bore; Body Cast iron EN-GJL-250; Ball 1.4301; Seals PTFE/NBR; Pressure range 0...16bar; Medium temperature -10...+120°C

Flanged ball valve Series BA040-L

Flange PN16, Full bore; Body Steel; Ball 1.4301; Seals PTFE/FKM; Pressure range 0...16bar; Medium temperature -20...+160°C

Flanged ball valve Series BA043-L

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to EN558−1R27; Full bore; Body Zinc plated steel; Ball 1.4301; Seals PTFE/Graphoil/FKM; Medium temperature -10...+160°C; With locking device

Flanged ball valve Series BA044-LLD-A

Flange PN40, Full bore; Body Steel; Ball 1.4301; Seals PTFE-reinforced/FKM; Pressure range 0...40bar; Medium temperature -20...+160°C

Flanged ball valve Series BA045

3-way-type; Sealing on two sides; Pressure inlet just in front; Reduced bore; Flange PN16; Body Steel; Ball 1.4301; Seals PTFE/FKM; Pressure range 0...16bar; Medium temperature -10...+160°C

Flanged ball valve Series BA046, BA047

Flange PN16, Full bore; Body, Ball 1.4301; Seals PTFE/FKM; Pressure range 0...16bar; Medium temperature -20...+160°C

Flanged ball valve Series BA048-L

Flange PN16, Full bore; Body, Ball 1.4401; Seals PTFE/FKM; Pressure range 0...16bar; Medium temperature -20...+160°C

Flanged ball valve Series BA049

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to EN558−1R27; Full bore; Body, Ball 1.4408; Seals PTFE/Graphoil/FKM; Medium temperature -20...+160°C; With locking device

Flanged ball valve Series BA051-A

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to EN558−1R27; Full bore; Body, Ball 1.4408; Seals PTFE/MFQ; Medium temperature -40...+200°C; With locking device; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness; Incl. Technical valve passport RU According to TR CU 032/2013; Incl. TR CU 032/2013 (Incl. Strength calculation), TR CU 010/2011; Incl. EAC-Certificate

Flanged ball valve Series BA326-LLD-A-3M

ATEX II 2 G/D; Flange PN16, Full bore; Body Steel; Ball 1.4301; Seals PTFE/FKM; Pressure range 0...16bar; Medium temperature -20...+160°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness; Incl. Technical valve passport RU According to TR CU 032/2013; Incl. TR CU 032/2013 (Incl. Strength calculation), TR CU 010/2011; Incl. EAC-Certificate

Flanged ball valve Series BA043-L-A3M

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to EN558−1R27; Full bore; Body, Ball 1.4408; Seals PTFE/Graphoil/FKM; Medium temperature -20...+160°C; With locking device; Incl. Metal-Type plate; Incl. Inspection certificate EN-10204-3.1 For material, pressure, function and tightness

Flanged ball valve Series BA051-A3C

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to EN558−1R27; Full bore; Body, Ball 1.4408; Seals PTFE/Graphoil/FKM; Medium temperature -20...+160°C; With locking device; Incl. Metal-Type plate

Flanged ball valve Series BA051-A-01

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to EN558−1R27; Full bore; Body, Ball 1.4408; Seals PTFE/Graphoil/HNBR; Medium temperature -40...+150°C; With locking device

Flanged ball valve Series BA051-A-02

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to EN558−1R27; Full bore; Body, Ball 1.4408; Seals;PTFE/Graphoil/FKM; Medium temperature -20...+60°C; With locking device; Free of oil and grease for oxygen

Flanged ball valve Series BA051-A0

;3-way-type; Sealing on two sides; Pressure inlet just in front; Reduced bore; Flange PN16; Body, Ball 1.4401; Seals PTFE/FKM; Pressure range 0...16bar; Medium temperature -20...+160°C

Flanged ball valve Series BA053, BA054

3-way-type; Sealing on three ports; Full bore; Body, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C

Flanged ball valve Series BA055, BA056

Flange PN16, Full bore; Body, Ball 1.4401; Seals Fibre-glass-reinforced PTFE/FKM; Pressure range 0...16bar; Medium temperature -20...+160°C

Flanged ball valve Series BA070

Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE-Fibre-glass-reinforced/EPDM; Medium temperature -40...+160°C

Ball valve made of stainless steel Series BA329-L

Flange ANSI 600; ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to ANSI B16.10; Full bore; Body, Ball 1.4408; Seals PTFE/Graphoil/FKM; Pressure range 0...100bar; Medium temperature -20...+160°C

Flanged ball valve Series BA071

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to EN558−1R1; Full bore; Body, Ball Stainless steel AISI 316; Seals PTFE/Graphoil/FKM; Medium temperature -20...+160°C; With locking device

Flanged ball valve Series BA073-LLD-A

Bare shaft; 3-way-type; Female thread; Material 1.4571; Seals PEEK/FKM; Sealed on all sides; Medium temperature -20...+100°C

Ball valve made of stainless steel Series BA094

Full bore; Two-parts type; Long butt weld ends; Body Steel; Ball 1.4301; Seals PTFE-reinforced/FKM; Medium temperature -10...+160°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Ball valve made of steel Series BA307-3C

ATEX II 2 G/D; Fire-safe; TA-Luft; Flange ANSI 300; Length According to ANSI B16.10; Body 1.4408; Ball 1.4401; Seals fibre-glass-reinforced PTFE/FKM; Medium temperature -10...+160°C;Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Flanged ball valve Series BA101-L-A3C

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to ANSI B16.10; Body Zinc plated steel; Ball 1.4301; Seals PTFE/FKM; Medium temperature -10...+160°C; Flange ANSI150; Pressure range 0...20Bar; Incl. Inspection certificate EN-10204-3.1 For material, pressure, function and tightness

Flanged ball valve Series BA092-L-A3C

voller Durchgang; zweiteilig; Innengwinde/lange Anschweißenden; Gehäuse Stahl; Kugel 1.4301; Dichtungen PTFE-verstärkt/FKM; Mediumstemperatur -10...+160°C; inkl. Abnahmeprüfzeugnis EN-10204-3.1; für Material, Druck, Funktion und Dichtheit

Ball valve made of steel Series BA348-L-3C

Full bore; Three-parts type; Butt weld ends; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Medium temperature -20...+160°C; Incl. Certificate according to EN 10204-2.2

Ball valve made of stainless steel Series BA034-L-2C

Flange ANSI150, Full bore; Body Steel; Ball 1.4301; Seals PTFE/FKM; Pressure range 0...20bar; Medium temperature -10...+160°C; Incl. Inspection certificate EN-10204-3.1 For material, pressure, function and tightness

Flanged ball valve Series BA358-3C

Flange PN16, Full bore; Body Steel; Ball 1.4301; Seals PTFE/FKM Without dead space; Pressure range 0...16bar; Medium temperature -20...+160°C

Flanged ball valve Series BA361-L

3-way-type; Female thread; Full bore; Body 1.4404 Polished; Ball 1.4404; Seals PTFE/Kalrez; Sealing on three ports; Medium temperature -20...+170°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Ball valve made of stainless steel Series BA719-L-3C

3-way-type; Female thread; Full bore; Body 1.4404 Polished; Ball 1.4404; Seals PTFE/Kalrez; Sealing on three ports; Medium temperature -20...+170°C

Ball valve made of stainless steel Series BA719-L-3C

Flange PN16, Full bore; Body, Ball 1.4401; Seals PTFE/FKM Without dead space; Pressure range 0...16bar; Medium temperature -20...+160°C

Flanged ball valve Series BA196-L

3-way-type; Sealing on two sides; Pressure inlet just in front; Reduced bore; Flange ANSI150; Body Steel LCB; Ball 1.4301; Seals PTFE/FKM; Pressure range 0...16bar; Medium temperature -10...+160°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Flanged ball valve Series BA367-L-3C

Full bore; Three-parts type; Butt weld ends; Body, Ball 1.4401; Seals PTFE-reinforced/EPDM; Medium temperature -30...+160°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Ball valve made of stainless steel Series BA144-L-3C

For steam; ATEX II 2 G/D; Fire-safe; TA-Luft; Flange PN16; Full bore; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Pressure range Steam 0…11bar; Medium temperature -20...+187°C

Flanged ball valve Series BA086

Male thread according to ISO 8434-1 (DIN 2353); Body Zinc plated steel; Ball Stainless steel; Ball seals Cast iron; Stem seal Special seals; O-rings FKM; Medium temperature -20...+100°C; For Isocyanate

High pressure ball valve Series BA362-L

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to EN558−1R27; Full bore; Body, Ball 1.4408; Seals TFM-MPTFE/PTFE/Graphoil; Stem sealing V-Pack;Medium temperature -40...+180°C; With locking device

Flanged ball valve Series BA368-LLD-A

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to EN558−1R27; Full bore; Body, Ball 1.4408; Seals TFM-MPTFE/PTFE/Graphoil; Stem sealing V-Pack ;Medium temperature -40...+180°C; With locking device; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Flanged ball valve Series BA368-LLD-A-3C

; Male thread according to ISO 8434-1 (DIN 2353); Drilled for mounting an actuator; Body, Ball 1.4571/1.4404; Seals POM/FKM; For liquids; Medium temperature -20...+100°C

High pressure ball valve Series BA102-L/S-B

3-way-type; Sealing on three ports; Female thread; Body, Ball 1.4571; Seals PEEK/FKM-Low temperature; With erosion protection ring; Medium temperature -30...+200°C (151...+200°C Max. 95bar)

High pressure ball valve Series BA351-L

Wafer type; ATEX II 2 G/D; TA-Luft; Full bore; Body, Ball 1.4401/1.4408; Seals PTFE-metal reinforced/FKM; Medium temperature -20...+160°C

Flanged ball valve Series BA383

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to ANSI B16.10; Body Zinc plated steel; Ball 1.4301; Seals PTFE/FKM; Medium temperature -10...+160°C; Flange ANSI150; Pressure range 0...20Bar; Free of oil and grease for oxygen

Flanged ball valve Series BA092-L-A0

ATEX II 2 G/D; TA-Luft; DVGW-gas-approved; Length According to ANSI B16.10; Full bore; Body Zinc plated steel; Ball 1.4301; Seals Fibre-glass-reinforced PTFE/HNBR; Medium temperature 0...+50°C; Flange ANSI150; Pressure range 0...20Bar

Flanged ball valve Series BA386-L-A

ATEX II 2 G/D; Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA391

ATEX II 2 G/D; Fire-safe; TA-Luft; Full bore; Body, Ball 1.4401; Seals TFM-MPTFE/PTFE/Graphoil; Stem sealing V-Pack; Medium temperature -40...+180°C

Flanged ball valve Series BA389-L-A

Full bore; Female thread; Seal PTFE/NBR/FKM; Medium temperature -20...+160°C; Hand lever Steel

Ball valve made of brass Series BA171-L

Full bore; Female thread; Seal PTFE/NBR; Medium temperature -20...+160°C; Hand lever Plasticized steel

Ball valve made of brass Series BA943-L

Full bore; Female thread; Seal PTFE/FKM; Medium temperature -20...+120°C; Turning handle Aluminum Blue

Ball valve made of brass Series BA633-TH

Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals Fibre-glass-reinforced PTFE/HNBR; Medium temperature -40...+150°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Ball valve made of stainless steel Series BA334-L-3C

Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals Fibre-glass-reinforced PTFE/HNBR; Medium temperature -40...+150°C

Ball valve made of stainless steel Series BA334-L

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to EN558−1R27; Full bore; Body, Ball 1.4408; ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to EN558−1R27; Full bore; Body Steel A352-LCB, Ball Stainless steel AISI 316; Seals PTFE/Graphoil/FKM; Medium temperature -20...+160°C; With locking device

Flanged ball valve Series BA843-LLD-A

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to EN558−1R27; Full bore; Body, Ball 1.4408; Seals PTFE/Graphoil/FKM; Medium temperature -20...+160°C; With locking device

Flanged ball valve Series BA284-LLD-A

ATEX II 2 G/D; Female thread; Body, Ball 1.4401/1.4542; Seals Metallic/Graphoil; Medium temperature -46...+400°C; Stem extension

Ball valve made of stainless steel Series BA715-L-A

Full bore; Two-parts type; Female thread; Body Brass, Ball 1.4401; Seals PTFE/NBR; Medium temperature -20...+160°C; Hand lever Steel

Ball valve Series BA382-N

ATEX II 2 G/D; Full bore; Three-parts type; Butt weld ends; Body Steel A352-LCB; Ball 1.4301; Seals Fibre-glass-reinforced PTFE/FKM; Medium temperature -20...+160°C

Ball valve made of steel Series BA399-L-A

Full bore; Three-parts type; Socket weld ends; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Medium temperature -20...+160°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Ball valve made of stainless steel Series BA035-L-3C

ATEX II 2 G/D; Full bore; Three-parts type; Female thread; Body Steel; Ball 1.4301; Seals PTFE/FKM; Medium temperature -10...+160°C

Ball valve made of steel Series BA028-L-A

Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE-Graphite reinforced/HNBR; Medium temperature -40...+150°C

Ball valve made of stainless steel Series BA409-L

Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE-Graphite reinforced/HNBR; Medium temperature -40...+150°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Ball valve made of stainless steel Series BA409-L-3C

ATEX II 2 G/D; Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE-Graphite reinforced/HNBR; Medium temperature -40...+150°C

Ball valve made of stainless steel Series BA409-L-A

ATEX II 2 G/D; Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE-Graphite reinforced/HNBR; Medium temperature -40...+150°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Ball valve made of stainless steel Series BA409-L-A3C

ATEX II 2 G/D; Full bore; Two-parts type; Female thread; With locking device; Body, Ball 1.4401; Seals PTFE-Graphite reinforced/HNBR; Medium temperature -40...+150°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Ball valve made of stainless steel Series BA409-LLD-A3C

ATEX II 2 G/D; Fire-safe; TA-Luft; Full bore; Two-parts type; Female thread; Body, Ball 1.4408; Seals PTFE/FFKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA493-L-A

ATEX II 2 G/D; Fire-safe; TA-Luft; Full bore; Two-parts type; Female thread; Body, Ball 1.4408; Seals PTFE/FFKM; Medium temperature -20...+160°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Ball valve made of stainless steel Series BA493-L-A3C

ATEX II 2 G/D; Full bore; Body, Ball 1.4401; Seals PTFE Reinforced with carbographite/EPDM; Medium temperature -40...+160°C

Flanged ball valve Series BA402-L-A

Suitable for series BA028, 713000; Material Stainless steel AISI 304

Ball

Full bore; Three-parts type; Female thread; Body, Ball 1.4401; Seals PTFE-Reinforced with carbographite/EPDM; Medium temperature -40...+160°C; With additional compensation hole in the ball

Ball valve made of stainless steel Series BA410-L

3-way-type; Female thread; Full bore; Body 1.4404 Polished; Ball 1.4404; Seals MPTFE/FKM; Sealing on three ports; Medium temperature -20...+160°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Ball valve made of stainless steel Series BA552-3C, BA576-3C

3-way-type; Sealing on two sides; Pressure inlet just in front; Female thread; Body Zinc plated steel; Ball Steel; Seals POM/NBR; Medium temperature -20...+100°C; For liquids

High pressure ball valve Series BA236-B, BA646-B

Full bore; Three-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C; Incl. Inspection certificate EN-10204-3.1

Ball valve made of stainless steel Series BA033-N-3C

ATEX II 2 G/D; TA-Luft; Full bore; Three-parts type; Butt weld ends; Body, Ball 1.4401; Seals Fibre-glass-reinforced PTFE/FFKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA397-L-A

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to ANSI B16.10; Flange ANSI150; Full bore; Body, Ball 1.4408; Seals PTFE/Graphoil/FKM; Pressure range 0...20bar; Medium temperature -20...+160°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Flanged ball valve Series BA178-L-A3C

ATEX II 2 G/D; Fire-safe; TA-Luft; Full bore; Body, Ball 1.4401; Seals TFM-MPTFE/PTFE/Graphoil; Stem sealing V-Pack; Medium temperature -40...+180°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Flanged ball valve Series BA389-L-A3C

ATEX zone 1; Female thread; Body, Ball 1.4571/1.4404; Seals PEEK-ATEX/NBR; With erosion protection ring; Medium temperature -30...+100°C; For liquids; Incl. Inspection certificate EN-10204-3.1 For material, pressure, function and tightness

High pressure ball valve Series BA234-L-A3G

; Free of oil and grease; Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/FFKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA431-0

Full bore; Female thread; Seal PTFE; Medium temperature -20...+160°C; Hand lever Aluminum

Ball valve made of brass Series BA157, BA434

ATEX II 2 G/D; Flange PN16, Full bore; Body, Ball 1.4401; Seals PTFE/FKM; Pressure range 0...16bar; Medium temperature -20...+160°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Flanged ball valve Series BA049-A3C

Full bore; Two-parts type; Female/male thread; Body 1.4404 Polished; Ball 1.4404; Seals MPTFE/FKM; Medium temperature -20...+170°C

Ball valve made of stainless steel Series BA624-L

Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/EPDM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA440

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to ANSI B16.10; Full bore; Body 1.4408, Ball 1.4401; Seals TFM-MPTFE/PTFE/Graphoil; Stem sealing V-Pack;Medium temperature -40...+180°C; With locking device; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Flanged ball valve Series BA413-LLD-A3C

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to ANSI B16.10; Full bore; Body Steel A352-LCB, Ball 1.4301; Body 1.4408, Ball 1.4401; Seals TFM-MPTFE/PTFE/Graphoil; Stem sealing V-Pack;Medium temperature -40...+180°C; With locking device; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Flanged ball valve Series BA435-LLD-A3C

Full bore; Three-parts type; Female thread; Body Steel A352-LCB; Ball 1.4301; Seals PTFE/FKM; Medium temperature -20...+160°C; Incl. Inspection certificate EN-10204-3.1 For material, pressure, function and tightness

Ball valve made of steel Series BA441-L-3C

ATEX II 2 G/D; Fire-safe; TA-Luft; Flange PN16, Full bore; Body Steel; Ball 1.4301; Seals PTFE-Graphite/FKM; Pressure range 0...16bar; Medium temperature -20...+160°C

Flanged ball valve Series BA106-L-A

Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA081

3-way-type; Sealing on three ports; Any pressure connection possible; Female thread; Body And Ball Stainless steel 1.4571; Seals POM/FPM; Medium temperature -20...+100°C

High pressure ball valve Series BA582-B

Full bore; Three-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/EPDM; Medium temperature -20...+150°C; Incl. Inspection certificate EN-10204-3.1

Ball valve made of stainless steel Series BA280-N-3C

For steam; ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to EN558−1R1; Full bore; Body Zinc plated steel; Ball 1.4301; Seals PTFE-Graphite reinforced/FKM-Perox; Pressure range Steam 0…15bar; Medium temperature -10...+198°C; With locking device

Flanged ball valve Series BA595-LLD-A

ATEX II 2 G/D; TA-Luft; Full bore; Three-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C; For material, pressure, function and tightness

Ball valve made of stainless steel Series BA033-A3C

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to EN558−1R1; Full bore; Body, Ball Stainless steel AISI 316; Seals PTFE/Graphoil/FKM; Medium temperature -20...+160°C; With locking device; For material, pressure, function and tightness

Flanged ball valve Series BA073-LLD-A3C

ATEX II 2 G/D; Flange PN63, Full bore; Body steel A350-LF2, Ball 1.4301; Seals Fibre-glass-reinforced PTFE/PTFE/Graphoil/FKM; Pressure range 0…63bar; Medium temperature -20...+160°C

Flanged ball valve Series BA116-L-A

ATEX II 2 G/D; Flange PN63, Full bore; Body, Ball 1.4401; Seals Fibre-glass-reinforced PTFE/PTFE/Graphoil/FKM; Pressure range 0…63bar; Medium temperature -20...+160°C

Flanged ball valve Series BA622-L-A

3-way-type; Sealing on two sides; Pressure inlet just in front; Female thread; Body, Ball Stainless steel 1.4571/1.4404; Seals POM/NBR; Medium temperature -30...+100°C; For liquids

High pressure ball valve Series BA696, BA697

ATEX II 2 G/D; Full bore; Three-parts type; Female thread; Body, Ball 1.4401; Seals PTFE-Reinforced with carbographite/EPDM; Medium temperature -40...+160°C

Ball valve made of stainless steel Series BA364-L-A

Flange PN16, Full bore; Body Cast iron EN-GJL-250; Ball 1.4301; Seals PTFE/FKM; Pressure range 0...16bar; Medium temperature -10...+160°C

Flanged ball valve Series BA126-L

3-way-type; Sealing on three ports; Female thread; Body 1.4571; Ball 1.4571 Hard chrome plated; Seals POM/NBR; With erosion protection ring; For gases; Medium temperature -30...+100°C

High pressure ball valve Series BA363-L

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to EN558−1R27; Full bore; Body, Ball 1.4408; Seals PTFE - Thickness Reduced/Graphoil/FFKM; Medium temperature -20...+160°C; With locking device

Flanged ball valve Series BA340

ATEX II 2 G/D; Flange PN63, Full bore; Body, Ball 1.4401; Seals Fibre-glass-reinforced PTFE/PTFE/Graphoil/FKM; Pressure range 0…63bar; Medium temperature -20...+160°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Flanged ball valve Series BA662-L-A3C

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to EN558−1R27; Full bore; Body Steel A352-LCB; Ball 1.4301; Seals TFM-MPTFE/PTFE/Graphoil; Stem sealing V-Pack ;Medium temperature -40...+180°C; With locking device; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Flanged ball valve Series BA384-LLD-A-3C

Ball valve made of stainless steel Series BA387-L-3C Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE-Reinforced with carbographite/FFKM; Medium temperature -20...+198°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Ball valve made of stainless steel Series BA387-L-3C Full bore

Body 1.4404 Polished; Ball 1.4404; Seals PTFE/EPDM; Medium temperature -20...+150°C

Flanged ball valve Series BA489

ATEX II 2 G/D; Fire-safe; TA-Luft; Full bore; Body, Ball 1.4408; Seals PTFE/Graphoil/FKM; Medium temperature -20...+160°C; Free of oil and grease for hydrogen

Flanged ball valve Series BA261-L-AH

Full bore; Three-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/FKM; Free of oil and grease for oxygen

Ball valve made of stainless steel Series BA033-L-0

ATEX II 2 G/D; Fire-safe; Full bore; Two-parts type; Female thread; Body Steel; Ball 1.4301; Seals PTFE/FKM; Medium temperature -20...+160°C

Ball valve made of steel Series BA027-A

Full bore; Three-parts type; Butt weld ends; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Medium temperature -20...+160°C; Free of oil and grease for oxygen

Ball valve made of stainless steel Series BA034-L-0

; Male thread according to DIN 2353; Drilled for mounting an actuator; Body, Ball 1.4571/1.4404; Seals PEEK/FKM; Medium temperature -20...+200°C; For liquids

High pressure ball valve Series BA360-B

3-way-type; Female thread; Reduced bore; Body 1.4408; Ball 1.4401; Seals PTFE; Sealing on three ports; Medium temperature -20...+160°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Ball valve made of stainless steel Series BA037-3C, BA038-3C

ATEX II 2 G/D T4; Bare shaft; Female thread; Full bore; Body 1.4404 Polished; Ball 1.4404; Seals PTFE/EPDM-Special; Medium temperature -45...+150°C; Free of oil and grease for hydrogen

Ball valve made of stainless steel Series BA125-B-AH

ATEX II 2 G/D T4; Bare shaft; Female thread; Full bore; Body 1.4404 Polished; Ball 1.4404; Seals PTFE/EPDM-Special; Medium temperature -45...+150°C; Free of oil and grease for hydrogen; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Ball valve made of stainless steel Series BA125-B-AH3C

Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Ball valve made of stainless steel Series BA081-3C

Female thread; Body, Ball 1.4571/1.4404; Seals PEEK/FKM; Medium temperature -20...+200°C

High pressure ball valve Series BA243

Flange ANSI 300, Full bore; Body, Ball 1.4401; Seals PTFE-reinforced/FKM; Medium temperature -20...+160°C

Flanged ball valve Series BA112

ANSI 800; ATEX II 2 G/D; Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals RPTFE/FKM; Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA269-A

Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE/FKM; Medium temperature -20...+160°C; With locking device;Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Ball valve made of stainless steel Series BA069-LD

ATEX II 2 G/D; Fire-safe; TA-Luft; Full bore; Body, Ball 1.4408; Seals PTFE/Graphoil/FKM; Medium temperature -20...+160°C

Flanged ball valve Series BA261-L-A

Flange PN16, Full bore; Body, Ball 1.4401; Seals PTFE/EPDM; Pressure range 0...16bar; Medium temperature -20...+160°C; With additional compensation hole in the ball

Flanged ball valve Series BA752

ATEX II 2 G/D; Fire-safe; TA-Luft; Full bore; Body Steel, Ball 1.4301; Seals TFM-MPTFE/PTFE/Graphoil; Stem sealing V-Pack; Medium temperature -20...+180°C

Flanged ball valve Series BA497-L-A

ATEX II 2 G/D; Fire-safe; TA-Luft; Length According to EN558−1R101; Flange PN100, Full bore; Body And Ball Stainless steel AISI 316; Seals PTFE-metal reinforced/Graphoil/FKM; Pressure range 0...100bar; Medium temperature -20...+160°C;Free of oil and grease for hydrogen

Flanged ball valve Series BA162-AH

ATEX II 2 G/D; Fire-safe; TA-Luft; Full bore; Two-parts type; Female thread; Body, Ball 1.4401; Seals PTFE-Reinforced with carbographite; Class 800; Pressure range 0-138bar;Medium temperature -20...+160°C

Ball valve made of stainless steel Series BA469-LA

Flanged ball valve Series BA084; ATEX II 2 G/D; Fire-safe; TA-Luft; Full bore; Body, Ball 1.4301; Ball seal PTFE-graphite reinforced/FKM; Medium temperature -20...+160°C; Flange PN16; Pressure range 0...16bar

Flanschkugelhahn Serie BA084-L-A

Stem extension Series RI65

Male thread according to ISO 8434-1 (DIN 2353); Body Zinc plated steel; Ball Steel; Seals POM/FKM; Medium temperature -20...+100°C; For liquids

High pressure ball valve Series BA306-L-L, BA306-S-L

Female thread; Body, Ball Stainless steel AISI 316Ti; Seals PEEK/FKM; For liquids; Medium temperature -20...+100°C

High pressure ball valve Series BA066-L

Female thread	DN	Pressure range	Type	Sequence
-	-	-	BA772-12-0H	22870000
-	-	-	BA772-12-B	22870001
G 1"	25 mm	0...16 bar	BA678-10-L	22870002
G 1 1/4"	32 mm	0...16 bar	BA678-114-L	22870003

Female thread	DN	Length	Pressure range	Design	Type	Sequence
1/4" NPT	9 mm	52 mm	0...100 bar	-	BA168-14N-L	22890000
G 1/4"	9 mm	52 mm	0...100 bar	-	BA168-14-L	22890001
G 3/8"	10 mm	52 mm	0...100 bar	-	BA168-38-L	22890002
1/2" NPT	15 mm	62 mm	0...100 bar	-	BA168-12N-L	22890003
G 1/2"	15 mm	62 mm	0...100 bar	-	BA168-12-L	22890004
G 3/4"	20 mm	72 mm	0...100 bar	-	BA168-34-L	22890005
G 1"	25 mm	82 mm	0...64 bar	-	BA168-10-L	22890006
G 2"	50 mm	116 mm	0...64 bar	-	BA168-20-L	22890007

Search

Your Cart

Categories

My Cart

My Wishlist

Ball valves - manually operated

Pressure range

DN

Flange

Ball

Female thread

Connection

Male thread

Type

Thread

Butt weld ends

Keywords