-
directly operated; connection flange according to DIN28459; body and flange aluminum; tube natural rubber; control pressure 1,8...2,5 bar higher than effective pressure; medium temperature -10...+80 °Cpinch valve series PI12
-
wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed EPDM; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; unidirectional sealed; voltage 400V/3/50Hz; medium temperature -5...+90°Cknife gate valve with electric actuator series A1ED
-
wafer type; body AISI 316; gate AISI 316; soft sealed EPDM; packing PTFE-synthetic/EPDM; nominal flange pressure PN10; unidirectional sealed; voltage 400V/3/50Hz; medium temperature -5...+90°Cknife gate valve with electric actuator series A1ED
-
suitable for pneumatic cylinder for knife gate valve series A, AB, AD, F, L and U; NBR; without piston
seal kit -
wafer type; body cast iron EN-GJL-250; gate Hardox 600; soft sealed Flucast-R; with reinforced fixing ring; packing PTFE-synthetic/EPDM/scraper; nominal flange pressure PN10; sealed in both directions; control pressure 5,5...8bar; prepared for 2 mechanical switches MSU01gate valve with double acting pneumatic actuator series ABZ1
-
NC; body stainless steel AISI 316; seal PTFE; weld ends according to DIN 11850 row 2; for gaseous media; closing with flow; medium temperature -30...+170°Cpneumatically operated seat valve series SE01-D-ST
-
NC; body stainless steel AISI 316; cap plastic; seal PTFE; weld ends according to DIN 11850 row 2; for gaseous media; closing with flow; medium temperature -30...+135°Cpneumatically operated seat valve series SE18-D-ST
-
directly operated; body aluminum; aluminum flange with steel socket; tube natural rubber food safe; control pressure 1,8...2,5 bar higher than effective pressure; medium temperature -10...+80 °Cpinch valve series VF
-
suitable for pneumatic cylinder for knife gate valve series A, AB, AD, F, L and U; NBR
piston -
suitable for pneumatic cylinder for knife gate valve series A, AB, AD, F, L and U
piston-rod -
wafer type; body cast iron EN-GJL-250; gate AISI 304; soft sealed EPDM; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature -5...+90°Cknife gate valve with double acting actuator series L1N
-
directly operated; connection female thread; tube EPDM food safe white; control pressure 1,8...2,5 bar higher than effective operating pressure; medium temperature -10...+120 °C
pinch valve series PI08 -
wafer type; body cast iron EN-GJL-250; gate AISI 304; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; sealed in both directions; control pressure 5,5...8bar; prepared for 2 inductive limit switches M18
knife gate valve with double acting actuator series AB1N -
wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner EPDM; nominal flange pressure PN10/16/ANSI150; single acting actuator; control pressure 5,5...8bar; medium temperature -10...+130°C; pressure range 0...10bar; silicone-freebutterfly valve with pneumatic actuator series BUW6-DSE-S2-S
-
wafer type; length according to EN558−1R20; body; disc and shaft AISI 316; liner NBR; nominal flange pressure PN10/16/ANSI150; double acting actuator; control pressure 5,5...8bar; medium temperature -10...+100°C; pressure range 0...10barbutterfly valve with pneumatic actuator series BUW6-SSNS-D2
-
wafer type; length according to EN558−1R20; body aluminum, disc AISI 316; shaft AISI 430; liner NBR; nominal flange pressure PN10/16/ANSI150; medium temperature -10...+100°C; pressure range 0...10barbutterfly valve with bare shaft series BUW6-ASN-D2
-
suitable for knife gate valve series AZ, ABZ, ADZ, FZ, LZ and UZ
spare cylinder -
wafer type; double eccentric; length according to EN558−1R20; body and disc AISI 316, shaft AISI 630; seat RTFE; medium temperature -10...+230°C; single acting actuator; control pressure 5,5...8barbutterfly valve with pneumatic actuator series BUW9-SSRS-S
-
ATEX II 2 G/D Ex h X; wafer type;double eccentric; length according to EN558−1R20; body and disc AISI 316, shaft AISI 630; seat RTFE; medium temperature -10...+230°C; single acting actuator; control pressure 5,5...8barbutterfly valve with pneumatic actuator series BUW9-SSRS-S-A
-
AISI 304 hard chrome plated; suitable for ABZ1-N3HX61A
scraper ring series SR -
wafer type; double eccentric; length according to EN558−1R20; body, disc AISI 316; shaft AISI 630; seat RTFE; double acting actuator; control pressure 5,5...8bar; medium temperature -10...+230°Cbutterfly valve with pneumatic actuator series BUW9-SSRS-D
-
suitable for pneumatic cylinder series PC500
cylinder tube -
wafer type; body AISI 316; gate AISI 316; soft sealed EPDM; packing PTFE-synthetic/EPDM; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature -5...+90°C; prepared for 2 mechanical switches MSU01Aknife gate valve with double acting actuator series A1N
-
wafer type; body AISI 316; gate AISI 316; soft sealed PTFE; packing PTFE; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature -20...+180 °Cknife gate valve with double acting actuator series A1N
-
wafer type; body cast iron EN-GJL-250; gate Hardox 600; soft sealed Flucast-R; with reinforced fixing ring AISI 304 hard chrome plated; packing PTFE-synthetic/EPDM/scraper; nominal flange pressure PN10; sealed in both directions; control pressure 5,5...8bar; prepared for 2 mechanical switches MSU01gate valve with double acting pneumatic actuator series ABZ1
-
wafer type; body AISI 316; gate AISI 316; metal sealing; sliding guide bronze; gate and seat reinforced; packing graphite; nominal flange pressure PN10; unidirectional sealed; medium temperature max. +250°C; control pressure 5,5...8barknife gate valve with double acting actuator series K1N
-
female thread; body brass; disc PEI (Ultem 1000); pressure range 0...16bar; medium temperature -10...+130°C; double acting actuator; control pressure 6...8barbutterfly valve with pneumatic actuator series BU900-D0
-
wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner EPDM; nominal flange pressure PN10/16/ANSI150; medium temperature -10...+130°C; pressure range 0...6barbutterfly valve with electrical actuator series BUW2-DSE-0
-
wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner NBR; nominal flange pressure PN10/16/ANSI150; double acting actuator; control pressure 5,5...8bar; medium temperature -10...+100°C; pressure range 0...10barbutterfly valve with pneumatic actuator series BUW6-DSN-D2
-
wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner EPDM; nominal flange pressure PN10/16/ANSI150; medium temperature -10...+130°C; pressure range 0...16barbutterfly valve with electrical actuator series BUW6-DSE-01
-
NC; connection parts AISI 316L; tube FKM; medium temperature -10...+130°Cpinch valve series PI03
-
wafer type; length according to EN558−1R20; body steel; disc and shaft AISI 316; liner EPDM; nominal flange pressure PN10/16/ANSI150; medium temperature -10...+130°C; pressure range 0...10barbutterfly valve with electrical actuator series BUW6-CSES-0
-
lug type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner FKM; single acting actuator; control pressure 5,5...8bar; medium temperature -10...+200°C; pressure range 0...10barbutterfly valve with pneumatic actuator series BULG-S, BULC-S
-
wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner FKM; nominal flange pressure PN10/16/ANSI150; single acting actuator; control pressure 5,5...8bar; medium temperature -10...+200°C; pressure range 0...10barbutterfly valve with pneumatic actuator series BUW6-DSV-S2
-
wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner FKM; nominal flange pressure PN10/16/ANSI150; single acting actuator; control pressure 5,5...8bar; medium temperature -10...+200°C; pressure range 0...10bar; incl. inspection certificate EN-10204-3.1; for material, pressure and tightnessbutterfly valve with pneumatic actuator series BUW6-DSV-S2-3C
-
wafer type; body cast iron EN-GJL-250; gate AISI 304; packing PTFE-synthetic/EPDM with copper scraper; screws stainless steel; nominal flange pressure PN10; sealed in both directions; control pressure 5,5...8bar; prepared for 2 inductive limit switches M18
knife gate valve with double acting actuator with emergency handwheel series AB1NE -
ATEX II 2 G/D Ex h X; wafer type; length according to EN558−1R20; for abrasive medias (e.g. sand, cement, etc.); body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner carboxylated NBR; nominal flange pressure PN10/16/ANSI150; double acting actuator ATEX II 2 G/D c T6; control pressure 5,5...8bar; medium temperature -10...+100°C; pressure range 0...6barbutterfly valve with pneumatic actuator series BUW2-DSC-D-A
-
wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner polyurethane; nominal flange pressure PN10/16/ANSI150; double acting actuator; control pressure 5,5...8bar; medium temperature -10...+90°C; pressure range 0...10barbutterfly valve with pneumatic actuator series BUW6-DSP1-D2
-
ATEX II 2 G/D Ex h X; wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner polyurethane; nominal flange pressure PN10/16/ANSI150; double acting actuator; control pressure 5,5...8bar; medium temperature -10...+90°C; pressure range 0...10barbutterfly valve with pneumatic actuator series BUW6-DSP1-D2-A
-
ATEX II 2 G/D Ex h X; lug type; double eccentric; length according to EN558−1R20; body and disc AISI 316, shaft AISI 630; seat RTFE/inconel 625-graphite; nominal flange pressure PN25; medium temperature -10...+230°C single acting actuator; control pressure 5,5...8bar; fire-safe; ATEX II 2 G/D c TXbutterfly valve with pneumatic actuator series BULV
-
wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed EPDM; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; sealed in both directions; control pressure 5,5...8bar; medium temperature -5...+90°Cknife gate valve with double acting actuator series AB1N
-
directly operated; body aluminum; aluminum flange with stainless steel socket; tube natural rubber; control pressure 1,8...2,5 bar higher than effective pressure; medium temperature -10...+80°Cpinch valve series PI02
-
directly operated; body aluminum; aluminum flange with stainless steel socket; tube natural rubber food-safe FDA-approved; control pressure 1,8...2,5 bar higher than effective pressure; medium temperature -10...+80°Cpinch valve series PI02-WRA
-
distribution function; 3-way-type; body stainless steel AISI 316; seal PTFE; female thread; medium temperature -30...+200°C; control actuator CA24C 24VAC/DC; control signal 4-20mA; position feedback 4-20mA; 2 limit switch; characteristic linear; with control coneelectrical seat valve series SEC14-CA24C
-
wafer type; with DVGW certificate for water; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 420; liner EPDM; double acting actuator; control pressure 5,5...8bar; medium temperature -15...+80°C; medium water; pressure range 0...10barbutterfly valve with pneumatic actuator series BUA-D-DVGW
-
suitable for pinch valve series PI08spare tubes
-
lug type; length according to EN558−1R20; for abrasive medias (e.g. sand, cement, etc.); body EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner carboxylated NBR; double acting actuator; control pressure 5,5...8bar; medium temperature -10...+100°C; pressure range 0...6barbutterfly valve with pneumatic actuator series BULI-D, BULB-D
-
lug type; length according to EN558−1R20; for abrasive medias (e.g. sand, cement, etc.); body EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner carboxylated NBR; single acting actuator; control pressure 5,5...8bar; medium temperature -10...+100°C; pressure range 0...6barbutterfly valve with pneumatic actuator series BULI-S, BULB-S
-
wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed NBR; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; sealed in both directions; control pressure 5,5...8bar; medium temperature -5...+90°Cknife gate valve with double acting actuator series AB1N
-
; suitable for series SE01, SE02, SE03; body brass, bronze; seal EPDMseal kit
-
high temperature design; ATEX area 1,21; NC; body stainless steel AISI 316; seal PTFE; female thread; for gaseous media; closing with flow; medium temperature -30...+200°C; incl. splash water protectionpneumatically operated seat valve series SE01-ST-HT
-
spare body pneumatically operated seat valves
-
wafer type; double eccentric; length according to EN558−1R20; body steel epoxy coated; disc AISI 316; shaft AISI 630; seat RTFE; double acting actuator; control pressure 5,5...8bar; medium temperature -10...+230°Cbutterfly valve with pneumatic actuator series BUW9-CSRS-D
-
wafer type; double eccentric; length according to EN558−1R20; body steel epoxy coated; disc AISI 316; shaft AISI 630; seat Inconel 625; single acting actuator; control pressure 5,5...8bar; medium temperature -10...+425°Cbutterfly valve with pneumatic actuator series BUW9-CSIS-S
-
wafer type; double eccentric; length according to EN558−1R20; body, disc AISI 316; shaft AISI 630; seat Inconel 625; nominal flange pressure PN10/16/25/ANSI150; single acting actuator; control pressure 5,5...8bar; medium temperature -10...+425°C; pressure range 0...25barbutterfly valve with pneumatic actuator series BUW9-SSIS-S4
-
lug type; double eccentric; length according to EN558−1R20; body steel epoxy coated; disc AISI 316; shaft AISI 630; seat Inconel 625; double acting actuator; control pressure 5,5...8bar; medium temperature -10...+425°Cbutterfly valve with pneumatic actuator series BUL-CSIS-D
-
wafer type; double eccentric; length according to EN558−1R20; body steel epoxy coated; disc AISI 316; shaft AISI 630; seat Inconel 625; double acting actuator; control pressure 5,5...8bar; medium temperature -10...+425°Cbutterfly valve with pneumatic actuator series BUW-CSIS-D
-
ATEX II 2 G/D Ex h X; wafer type; double eccentric; length according to EN558−1R20; body steel epoxy coated; disc AISI 316; shaft AISI 630; seat RTFE; double acting actuator ATEX II 2 G/D c T6; control pressure 5,5...8bar; medium temperature -10...+230°Cbutterfly valve with pneumatic actuator series BUW9-CSRS-D-A
-
wafer type; double eccentric; length according to EN558−1R20; body steel epoxy coated; disc AISI 316; shaft AISI 630; seat RTFE; double acting actuator; control pressure 5,5...8bar; medium temperature -10...+230°Cbutterfly valve with pneumatic actuator series BUW9-CSRS-D
-
wafer type; double eccentric; length according to EN558−1R20; body, disc AISI 316; shaft AISI 630; seat RTFE; medium temperature -10...+230°Cbutterfly valve with electrical actuator series BUW9-SSRS-0
-
wafer type; double eccentric; length according to EN558−1R20; body steel epoxy coated; disc AISI 316; shaft AISI 630; seat RTFE; medium temperature -10...+230°Cbutterfly valve with electrical actuator series BUW9-CSRS-0
-
;ATEX II 2 G/D Ex h X; wafer type; double eccentric; length according to EN558−1R20; body, disc AISI 316; shaft AISI 630; seat Inconel 625; double acting actuator ATEX II 2 G/D c T6; control pressure 5,5...8bar; medium temperature -10...+425°C; pressure range 0...25barbutterfly valve with pneumatic actuator series BUW9-SSIS-D4-A
-
wafer type; double eccentric; length according to EN558−1R20; body steel epoxy coated; disc AISI 316; shaft AISI 630; seat RTFE; single acting actuator; control pressure 5,5...8bar; medium temperature -10...+230°Cbutterfly valve with pneumatic actuator series BUW9-CSRS-S
-
lug type; double eccentric; length according to EN558−1R20; body, disc AISI 316; shaft AISI 630; seat RTFE; medium temperature -10...+230°C; single acting actuator; control pressure 5,5...8barbutterfly valve with pneumatic actuator series BUL-SSRS-S2
-
ATEX II 2 G/D Ex h X; lug type; double eccentric; length according to EN558−1R20; body, disc AISI 316; shaft AISI 630; seat inconel 625; medium temperature -10...+425°C; single acting actuator ATEX II 2 G/D c T6; control pressure 5,5...8barbutterfly valve with pneumatic actuator series BUL-SSIS-S2-A
-
ATEX II 2 G/D Ex h X; lug type;double eccentric; length according to EN558−1R20; body, disc AISI 316; shaft AISI 630; seat inconel 625; medium temperature -10...+425°C; double acting actuator ATEX II 2 G/D c T6; control pressure 5,5...8bbutterfly valve with pneumatic actuator series BUL-SSIS-D2-A
-
ATEX II 2 G/D Ex h X; wafer type;double eccentric; length according to EN558−1R20; body steel epoxy coated; disc AISI 316; shaft AISI 630; seat Inconel 625; single acting actuator ATEX II 2 G/D c T6; control pressure 5,5...8bar; medium temperature -10...+425°Cbutterfly valve with pneumatic actuator series BUW9-CSIS-S-A
-
NO; lug type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner EPDM; single acting actuator; control pressure 5,5...8bar; medium temperature -10...+130°C; pressure range 0...10barbutterfly valve with pneumatic actuator series BULG-DSE-T22, BULC-DSE-T22
-
width 22mmcoil type C015
-
connector size 22mm; form B-ISOconnector series C004
-
wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed EPDM; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature -5...+90°C; incl. 2 mechanical limit switches OPEN/CLOSEDknife gate valve with double acting actuator series A1N2H2-5-2EM-B
-
wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed EPDM; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature -5...+90°C; incl. 2 inductive limit switches OPEN/CLOSEDknife gate valve with double acting actuator series A1N2H2-5-2EM-B
-
directly operated; connection female thread; connection part POM white; tube natural rubber; control pressure 1,8...2,5 bar higher than effective operating pressure; medium temperature -10...+80 °C
pinch valve series PI08 -
wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 316; liner EPDM; nominal flange pressure PN10/16/ANSI150; medium temperature -10...+130°C; pressure range 0...10barbutterfly valve with electrical actuator series BUW6-DSE-02
-
NC; connection parts AISI 316L; tube EPDM food safe; medium temperature -30...+95°Cpinch valve series PI03
-
NO; connection parts AISI 316L; tube EPDM food safe; control pressure has to be adjusted acc. to diagram in data-sheet; medium temperature -30...+95°Cpinch valve series PI04
-
directly operated; body aluminum; aluminum flange; tube natural rubber; control pressure 1,8...2,5 bar higher than effective pressure; medium temperature -10...+80°Cpinch valve series PI02-RAA
-
wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed EPDM; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature -5...+90°C; prepared for 2 mechanical switches MSU01A
knife gate valve with double acting actuator series A1N2H2-5-PMB -
ATEX II 2 G/D Ex h X; lug type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner EPDM; single acting actuator ATEX II 2 G/D c T6; control pressure 5,5...8bar; medium temperature -10...+130°Cbutterfly valve with pneumatic actuator series BULG-DSE-S22-A, BULC-DSE-S22-A, BULY-DSE-S22-A
-
NC; wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed EPDM; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature -5...+90°C; prepared for 2 inductive limit switches M18knife gate valves with single acting pneumatic actuator series A1S2H2-5-PIB
-
NC; wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed EPDM; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature -5...+90°Cknife gate valves with single acting pneumatic actuator series A1S2H2-5-B
-
NC (double acting-compressed air tank); wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed EPDM; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature -5...+90°Cknife gate valves with single acting pneumatic actuator series A1S2H2-5-B
-
NC; wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed EPDM; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature -5...+90°C; prepared for 2 mechanical switches MSU01Aknife gate valves with single acting pneumatic actuator series A1S2H2-5-PMB
-
lug type; double eccentric; length according to EN558−1R20; body steel epoxy coated; disc AISI 316; shaft AISI 630; seat RTFE; medium temperature -10...+230°C; single acting actuator; control pressure 5,5...8barbutterfly valve with pneumatic actuator series BUL-CSRS-S2
-
wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed FKM; packing PTFE-synthetic/FKM; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature 0...+120°Cknife gate valve with double acting actuator series A1N2H3-5V
-
wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed FKM; screws stainless steel; packing PTFE-synthetic/FKM; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature 0...+120°Cknife gate valve with double acting actuator series A1N2H3-5V-B
-
wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed FKM; screws stainless steel; packing PTFE-synthetic/FKM; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature 0...+120°C; prepared for 2 inductive limit switches M18knife gate valve with double acting actuator series A1N2H3-5V-PIB
-
wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed FKM; screws stainless steel; packing PTFE-synthetic/FKM; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature 0...+120°C; prepared for 2 mechanical switches MSU01Aknife gate valve with double acting actuator series A1N2H3-5V-PMB
-
NC; body stainless steel AISI 316; seal PTFE; female thread; for gaseous media and liquids; closing against flow; medium temperature -40...+180°Cpneumatically operated seat valve series 21IA.GC
-
suitable for pneumatic cylinder for knife gate valve series A, AB, AD, F, L and U; consists of seal kit NBR and piston
set of wear parts -
wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc and shaft AISI 316; liner PTFE/silicone; nominal flange pressure PN10/16/ANSI150; double acting actuator; control pressure 5,5...8bar; medium temperature -10...+190°C; pressure range 0...10barbutterfly valve with pneumatic actuator series BUW4-DSTS-D22
-
ATEX II 2 G/D Ex h; wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc and shaft AISI 316; liner PTFE/silicone; nominal flange pressure PN10/16/ANSI150; double acting actuator ATEX II 2 G/D c T6; control pressure 5,5...8bar; medium temperature -10...+190°C; pressure range 0...10barbutterfly valve with pneumatic actuator series BUW4-DSTS-D22-A
-
wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc and shaft AISI 316; liner PTFE/silicone; nominal flange pressure PN10/16/ANSI150; single acting actuator; control pressure 5,5...8bar; medium temperature -10...+190°C; pressure range 0...10barbutterfly valve with pneumatic actuator series BUW4-DSTS-S22
-
ATEX II 2 G/D Ex h; wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc and shaft AISI 316; liner PTFE/silicone; nominal flange pressure PN10/16/ANSI150; single acting actuator ATEX II 2 G/D c T6; control pressure 5,5...8bar; medium temperature -10...+190°C; pressure range 0...10barbutterfly valve with pneumatic actuator series BUW4-DSTS-S22-A
-
ATEX II 3 G/D; wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; metal seal with abrasion protection; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature -5...+90°Cknife gate valve with double acting actuator series A1N4H1-5-B
-
wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed EPDM; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; sealed in both directions; control pressure 5,5...8bar; medium temperature -5...+90°C; prepared for 2 mechanical switches MSU01Aknife gate valve with double acting actuator series AB1N
-
wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed EPDM; packing PTFE-synthetic/EPDM; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature -5...+90°C; prepared for 2 inductive switches MSU03, MSU04, MSU05
knife gate valve with double acting actuator series A1N-PI -
directly operated; Tri-Clamp connection according to DIN32676 row A; connection part stainless steel; tube natural rubber; control pressure 1,8...2,5 bar higher than effective operating pressure; medium temperature -10...+80 °C
pinch valve series PI08
|
knife gate valve with double acting actuator series AB1Nwafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed NBR; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; sealed in both directions; control pressure 5,5...8bar; medium temperature -5...+90°C
|
| DN | length | pressure range | Type | Price | |
|---|---|---|---|---|---|
| 80 mm | 50 mm | 0...10 bar | AB1N2H5-5-80-B |
582.10 €
|
|
| 100 mm | 50 mm | 0...10 bar | AB1N2H5-5-100-B |
615.90 €
|
|
| 125 mm | 50 mm | 0...10 bar | AB1N2H5-5-125-B |
742.30 €
|
|
| 150 mm | 60 mm | 0...8 bar | AB1N2H5-5-150-B |
756.50 €
|
|
| 50 mm | 40 mm | 0...10 bar | AB1N2H5-5-50-B |
Not Available For Sale
|
|
| 65 mm | 40 mm | 0...10 bar | AB1N2H5-5-65-B |
Not Available For Sale
|
|
| 80 mm | 50 mm | 0...10 bar | AB1N2H5-5N-65-B |
Not Available For Sale
|
|
| 80 mm | 50 mm | 0...10 bar | AB1N2H5-5N-100-B |
Not Available For Sale
|
|
| 80 mm | 50 mm | 0...10 bar | AB1N2H5-5N-200-B |
Not Available For Sale
|
|
| 80 mm | 50 mm | 0...10 bar | AB1N2H5-5N-50-B |
502.40 €
|
|
| 80 mm | 50 mm | 0...10 bar | AB1N2H5-5N-80-B |
565.20 €
|
|
| 80 mm | 50 mm | 0...10 bar | AB1N2H5-5N-125-B |
720.80 €
|
|
| 80 mm | 50 mm | 0...10 bar | AB1N2H5-5N-150-B |
786.30 €
|
|
| 80 mm | 50 mm | 0...10 bar | AB1N2H5-5N-250-B |
1,452.40 €
|
|
| 80 mm | 50 mm | 0...10 bar | AB1N2H5-5N-300-B |
1,722.70 €
|
|
| 80 mm | 50 mm | 0...10 bar | A1N2H5-5N-50-B |
507.80 €
|
|
| 80 mm | 50 mm | 0...10 bar | A1N2H5-5N-65-B |
532.40 €
|
|
| 80 mm | 50 mm | 0...10 bar | A1N2H5-5N-80-B |
565.20 €
|
|
| 80 mm | 50 mm | 0...10 bar | A1N2H5-5N-100-B |
608.80 €
|
|
| 80 mm | 50 mm | 0...10 bar | A1N2H5-5N-125-B |
731.70 €
|
|
| 80 mm | 50 mm | 0...10 bar | A1N2H5-5N-200-B |
1,111.20 €
|
|
| 80 mm | 50 mm | 0...10 bar | A1N2H5-5N-250-B |
1,474.20 €
|
|
| 80 mm | 50 mm | 0...10 bar | A1N2H5-5N-300-B |
1,785.50 €
|
|
| 80 mm | 50 mm | 0...10 bar | A1N2H5-5N-100-PIB |
608.80 €
|
|
| 80 mm | 50 mm | 0...10 bar | A1N2H5-5N-65-PIB |
532.40 €
|